Contact Platform Support
Help CenterSlurry Pump Price List Whih Used in Slurry of Phosphate to Tunisia
Related Products
-
Good Quality Slurry Pump With Abrasive Resistance Metal PartsUS$ 500 - 65,000MOQ: 1 Set -
Factory OEM Ash Slurry PumpsUS$ 3,000 - 10,000MOQ: 1 Set
-
Manufacturer Export Petrochemical Centrifugal PumpUS$ 3,000 - 10,000MOQ: 1 Set
-
Slurry Transportation Pump Export to South AfricaUS$ 1,000 - 8,500MOQ: 1 Set
-
Anti Errosion Chemical Pump/Acid Resistant PumpUS$ 3,000 - 10,000MOQ: 1 Set
slurry pump price list whih used in Slurry of phosphate to Tunisia
Hebei Silarui Pump Co.,Ltd.
We have our own casting and machining workroom. We can do A05 and A49 metal parts according to your drawings.
The materials brand of A05 is KmTBCr26,used for higher wearcondition with PH between 5 and 12.
A49 materials is used lower PH conditions especially for flue gas. It also can be used for lower-sour condition and desulfuration installation with PH not be less than 4.
A05 and A49 are high-chrome alloy castings.
kindly contact us if any questions. It is our pleasure to be on service of you!
slurry pump price list whih used in Slurry of phosphate to Tunisia
Introduction: . SH Series slurry pump is mainly using for handling abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc.
BENEFITS
• Bearing assembly – a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
• Liners – easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer seal rings back all liner joints.
• Casing – Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
• Impeller – front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
• Throatbush – wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
• One-piece frame – a very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.
Construction design
The frame plates of this pump have changeable, hard metal or rubber liners. The impellers are made of wear-resistant metal or rubber.
The shaft seal of this kind of slurry pump could use the packing seal, centrifugal seal.
The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
The pump of this type may be installed in multistage series to meet the delivery for long distance.
Application:
- Mining & Minerals Processing
- Chemical Process
- Flue Gas Desulphurisation
- Sugar Processing
- Sand & Gravel
- Oil & Gas Exploration
- Industrial Application
Means of transmission
The series slurry pump may adopt means of transmission including direct connection DC,belt drive(CR,CL,CV,ZV), hydraulic and frequency control etc..
1)Q:Are you a factory or trading company?
A:We are a factory about slurry pump.
2)Q:Where is your factory located? How can I visit there?
A:you can fly to Shijiazhuang Zhengding Airport .
All our clients, from home or abroad, are warmly welcome to visit us!
3)Q:What is the payment terms?
A: L/C ,T/T
4)Q:How can I get some samples?
A: Kindly send us your address, we are honored to offer you samples.
5)Q:How does your factory do regarding quality control?
A: Our factory can accept any third party inspection.
Send Inquiry to This Supplier
You May Also Like
-
Spot Danfoss Piston Pump JR-L-S75C-LS-21-25-NN-N3-S1NE-A2NNNN-JJ J-NNNNegotiableMOQ: 1 Piece
-
M, AH, HH Series Slurry PumpNegotiableMOQ: 1 Piece
-
Explosion-Proof Slurry Pump for Mining Operations With 1-Year WarrantyUS$ 180 - 200MOQ: 100 Cases
-
Water PumpNegotiableMOQ: 2300 Pieces
-
Japan Komatsu PC200-8 PC210-8 PC220-8 Excavator 708-2L-31430 Hydraulic Main Pump 7082L31430US$ 4000 - 5000MOQ: 1 Unit
-
Innovative CMO GHIBLI FOOT PUMP Industrial Solutions for Enhanced PerformanceNegotiableMOQ: 1 Set
-
Manufacturer Direct Selling Fluorine Lined Strong Acid and Alkali Resistant Pump IHF Series Fluorine Plastic Alloy Chemical Centrifugal PumpUS$ 150 - 1600MOQ: 10 Pieces
-
Micro Machining Precision Casting Water Pump Spare PartsUS$ 1 - 30MOQ: 500 Pieces
-
Parts Of Breast PumpUS$ 1,000 - 1,100MOQ: 2 Tons
-
High Quality Oilfield 11kw-50kw Centrifugal PumpNegotiableMOQ: 1 Set
