FD eye-drop Servo injection blow molding machine blowing mould

FD eye-drop Servo injection blow molding machine blowing mould

Characteristics       
1, Moulds are suitable for FD serial manchine

2, Experienced mould design and high precision tooling.

3, High hardness treatment and high service life.

4, Injection mold and blowing mold are made of Stainless steel,also an optional Magnalium blow mold.

They are processed by special  high precision numerical control equipment and fully guarantee the forming quality of bottle product.

»Operating Principle

Station A:Preform injection

The bottle neck will be molded accurately after injecting the material into the cavity,After proper control,the mold open and mandrils to...along with the cavity.

Station B:Blow molding

Blowing action was done at this part,molding would be complete after cooling.(bottle shape decides by the mold cavity).The air came out from the mandrils huffs the cavity,make the cavity cling to the mold.Then mold open and the mandrils turn to...along with bottles.

Station C:Stripper

The bottle automatically will be ejected from the mandrils at this position and then to be packed.The three actions of injection/blowing/ejection working at the same time,which makes the machine of high efficiency and low waste with bottles.

reference ot bottle volume for each model machine

machine packed with film and  wooden pallet

mold packed by sea worthy wooden cases.