Contact Platform Support
Help CenterDENYKEM DX-ZYMe Enzymatic Stonewash Auxiliary
Related Products
Specifications
1. Appearance: Cream/white powder2. Composition: Cellulytic enzyme
3. Solubility: Fully soluble in water
4. Brand: Denykem
BENEFITS
* Concentrated fully formulated product (external buffer system required).
* Use with or without pumice thus reducing machine damage
* Use in conjunction with the Denynon surfactant range.
INTRODUCTION
DENYKEM DX-ZYME is a special blend of cellulytic enzymes. It is designed for use either alone or with
pumice stone to give maximum abrasion with minimum damage during the treatment of denim garments,
and reduced environmental pollution.
TEMPERATURE PROFILE
The temperature range of the Neutral products is also wide, the optimum temperature is 55°C, however, the products will perform at lower temperatures. Again, this wide range of temperature, coupled with the broad pH
makes the Neutral range extremely User Friendly.
pH PROFILE
This neutral enzyme has a broad pH and temperature range. The pH activity range of Ultima products is from 5.5 to 7.9 with minimal drop in activity. However, it is our recommendation that the products be used between pH 6 and 7.5. This broad band allows the Neutral cellulase to perform in a variety of local conditions.
Add DENYKEM DX-ZYME to the process in accordance with production instructions. For otimum performance,
use the following operational parameters:
Temperature: Commence at 55°C and allow to cool during the process.
Time: 25 - 90 minutes
pH: 6 - 8 (set by external buffer system)
Liquor ratio: 4:1 to 10:1
Surfactant: Requires external surfactant
TECHNICAL DATA (typical)
Appearance: Cream/white powder
Composition: Cellulytic enzyme
Solubility: Fully soluble in water
Storage: Store in dry and temperate conditions (5 - 35°C)
* Due to natural variations the actual shade may vary from batch to batch. This will not affect product .
performance.
TECHNICAL SERVICE
A team of technical advisors is backed up by full scale production and extensive research and
development facilities.
These conditions are only given as a guide. Tests should be carried out under local conditions to ascertain the optimum dosage for the machine type, fabric source and water conditions.
Send Inquiry to This Supplier
You May Also Like
-
PET Woven Filter Cloth for Filter PressUS$ 1 - 15MOQ: 1 Piece -
Industrial-grade Zinc Stearate Powder Release Agent for Plastic Injection MoldingUS$ 2 - 5MOQ: 1000 Kilograms
-
Sodium Gluconate Cas 527-07-1 25kgUS$ 100 - 2000MOQ: 1 Ton
-
Chemical AuxiliariesNegotiableMOQ: 2400 Kilograms
-
Zeolite Carbon Sieves 3a 4a 13x Adsorbent for Oxygen Concentrator Generator Molecular SieveNegotiableMOQ: 1
-
Modified Starch for Paper IndustrialUS$ 630 - 650MOQ: 5 Tons
-
NA Cmc Powder Food GradeUS$ 550 - 3,690MOQ: 5 Tons
-
Diapers Baler Hydraulic Pressing Baling MachineUS$ 3,200 - 3,250MOQ: 1 Set
-
Leather Wall Panel for Background and Ceiling PanelUS$ 3 - 6MOQ: 200 Pieces
-
AC Blowing Foam Blowing Agents of AzodicarbonamideUS$ 2,100 - 2,680MOQ: 1 Ton
