Catlase
Specifications
1. Appearance: Beige granular powder mix.2.Temperature: Commence at 65 C -70 C.
3. Time: 10 - 25 mins
4.Dosage: 0.5 - 2% owg
DENYKEM INDICLEAN 3 is a process used to de-colourize indigo in denim processing by using a system
containing enzyme and mediator. Indiclean acts directly on the dyestuff enabling denim finishing with
minimal strength loss.
Indiclean treatment is specific to indigo therefore sulphur black remains leaving a grey cast on the garment.
TEMPERATURE PROFILE
The temperature range of the INDICLEAN 3 product is 60 - 70 C.
Optimum performance - 65 - 70 C.
Direct Steam should be avoided.
PH AND ACTIVITY PROFILE
The Temperature range of the IndiClean system is 4.0 - 6.0.
Optimum performance - 4.5 - 5.0
Additional buffer for pH control may be required for exceptional pH conditions.
Activity range: 372.1----372.8DLU/G
DIRECTIONS FOR USE
Remove all surplus loose indigo colour prior to treatment.
For Cleaning and mild colour reduction add 1 - 2% (max) owg, time 10-25 mins.
For increased colour reduction - repeat above step 2 or 3 times, drain bath between steps.
No neutralisation required - only rinsing needed.
Recommend soaping or detergent rinse step after colour reduction. Hypochlorite can be used after above steps for
further colour reduction.
Temperature: Commence at 65°C -70 C.
Time: 10 - 25 mins
Dosage 0.5 - 2% owg
pH: 4.0 - 6 (set by in internal buffer system) (additional buffer may be required)
Liquor ratio: 5:1 to 10:1
TECHNICAL DATA (typical)
Appearance: Off white / beige granular powder mix.
Storage: Store sealed in dry and temperate conditions (5 - 25°C)
TECHNICAL SERVICE
The DENYKEM team of technical advisors is backed up by full scale production and extensive research and
development facilities.
These conditions are only given as a guide. Tests should be carried out under local conditions to ascertain the optimum dosage for the machine type,fabric source and water conditions.
Send Inquiry to This Supplier
You May Also Like
-
PET Woven Filter Cloth for Filter PressUS$ 1 - 15MOQ: 1 Piece
-
Industrial-grade Zinc Stearate Powder Release Agent for Plastic Injection MoldingUS$ 2 - 5MOQ: 1000 Kilograms
-
Sodium Gluconate Cas 527-07-1 25kgUS$ 100 - 2000MOQ: 1 Ton
-
Chemical AuxiliariesNegotiableMOQ: 2400 Kilograms
-
Zeolite Carbon Sieves 3a 4a 13x Adsorbent for Oxygen Concentrator Generator Molecular SieveNegotiableMOQ: 1
-
Modified Starch for Paper IndustrialUS$ 630 - 650MOQ: 5 Tons
-
NA Cmc Powder Food GradeUS$ 550 - 3,690MOQ: 5 Tons
-
Diapers Baler Hydraulic Pressing Baling MachineUS$ 3,200 - 3,250MOQ: 1 Set
-
Leather Wall Panel for Background and Ceiling PanelUS$ 3 - 6MOQ: 200 Pieces
-
AC Blowing Foam Blowing Agents of AzodicarbonamideUS$ 2,100 - 2,680MOQ: 1 Ton