Bio-polishing enzymes

Specifications

BENEFITS

  *  High-concentrated product. 
  *  Use with/without pumice stone thus reducing machine damage 
  *  Easy to apply via liquid feed systems. 
  *  Easy for dilution 
   
INTRODUCTION   
   
DENYPILL SP-AL is a stabilised acid cellulytic enzyme for stonewashing of cellulose based garments and fabrics.   
It gives high abrasion and best depilling.   
   
TEMPERATURE PROFILE   
   
The temperature range of DENYPILL SP-AL is wide, the optimum temperature is 55°C.  Again, this wide range of    
temperature, coupled with the broad pH makes the neutral range extremely user friendly.   
   
   
pH PROFILE   
   
DENYPILL SP-AL has a broad pH and temperature range.  The pH activity range is from 4.0 - 5.5 with minimal drop in  activity.  The broad band allows this product to perform well in a variety of local conditions.   
   
   
DIRECTIONS FOR USE   
   
Add DENYPILL SP-AL to the process in accordance with production instructions.  For optimum performance, use   
the following operational parameters: 

Temperature:   Commence at 40-55°C(Depend your requirement) 
Dose rate:   0.1 - 0.5% on weight of garment depending on finish required 
Time:   15 - 60 minutes 
pH:   4.5 - 5.5 (set by external buffer system) 
Liquor ratio:   4:1 - 10:1 
    
    
TECHNICAL DATA (typical)    
    
Appearance:   Clear amber liquid 
Composition:   Cellulytic enzymes 
                            Stabilisers 
pH:   4.5 - 5.0 
Solubility:   Miscible with water 
Storage:   Store in dry and temperate conditions (5 - 30°C) 

TECHNICAL SERVICE 
 
The DENYKEM team of technical advisors is backed up by full scale production and extensive research and  
development facilities. 
 
 
These conditions are only given as a guide.  Tests should be carried out under local conditions to ascertain the optimum dosage for the machine type,fabric source and water conditions.