Photoluminescent film with back adhesive

Rolls, Cartons

Specifications

Photoluminescent Film,
Self adhensive,PVC plastic
Yellow-green light color
Boat,ship, safety guidance
Silk screen printing

Brief introduction

The luminescent film is researched and produced by ourselves.Which have excellent effects of storing any visible light and glowing.After absorbing visible light for 10 to 30 minutes,they can glow in the dark for 12 hours at least. And it can be repeated any times for storing and glowing process. And they have good performance of enduring weather with non-toxic and harmless and no any radioactivity.

 

The luminescent film with self-adhesive can be used onto the surface of varied equipment or article,which use is the same with hard board, even more is more convenient.Such as it can be cut into many kinds of shapes or signs and put onto the place where need.Anyway it is useful and novel.For example,it is used in furniture decoration or put onto the surface of switch,telephone,handle,stationery,toy,sport article or indication in the public area, recreation ground.

 

 

 

 

 

Technological Index

 

Model	Color	Illuminating Color	Brightness mcd/m2   (No less than)					Illuminating Time (min) (0.3mcd/m2)	Specification
			1min	5min	10min	30min	60min
KLM-M-O-030	Yellow-green	Yellow-green	1800	500	250	75	33	3000	Regular 100*1000cm 30*400cm Proportional cutting enabled in the above size Thickness 0.30-0.36mm
KLM-M-O-025	Yellow-green	Yellow-green	1500	400	190	60	28	2800
KLM-M-TOS-015	Yellow-green	Yellow-green	500	190	90	24	9	1000

 

 

 

 

Functions:

1. High fire retardedness by use of illuminating film made by PVC plastics
2. High capacity of saline resistant and detergent resistant
3. High capacity in cold/heat resistance
4. High mechanical functions for illuminating films
5. Strong sticking ability for illuminating films.

Usage Procedure:

1. Preferably to be applied for construction on smooth surface with the temperature of 10~40°C.
2. Cut the film into different sizes and can be directly pasted to the places like switch for decoration use.
3. Figure/ character printed on the surface.
4. Clean the surface clean before pasting. No grease mark or dust allowed on the surface.
5. The film is expandable. Be careful not to dispose it at will and recommended to keep it pressed.
6. It is prone to humidity. Preferably have it processed in environment with 40%-60% in humidity.
7. Remove the paper from back and press neatly on the surface.
8. At times, the products with different batch numbers have color differences.
9. The color films of MY, MR, MB and MG are recommended not to be used outside.
10. The film at length of 10m is likely to have junctions.

Packing and Storage

1. Packing; Curly or slice shape for handi-wrap.
2. Storage: Keep in warehouse where is ventilated, dry and cool with temperature between 15°C and30°C and relative humidity between 40% and 60%.