Container House
Specifications
1, be used as field working2, Inside furniture, warming syetem,Refrigeration system,electric system,
3. high quality
Our mobile camp is of good reputation. With the integrative production line of sheet material molding, processing, welding, sand blasting and baking finish, we are enabled to produce about 1000 sets per year. Our products fall into two catalogue: over 30 types of engineering camp house and living camp house. Different types of house could be made according to customers' requirements. Apart from being used in many domestic oilfields, our products are also exported to Sudan, Venezuela, Azerbaijan,etc..
product performance
The car carry type camping house manufactured by our company has spacious rooms, comfortable, attractive, durable, easy transported, good sealing, warm-keeping, rain-proof, cold defence and other characteristics.
The main technical data
NO |
Items |
Data |
1 |
Overall Size |
Length:9100±5mm;Width3000±5mm;Height:4050±5mm;(or design as to customer's requirements) |
2 |
Welding Quality |
firm welding,formation,without weld beading,weld penetration,blister and so on. Remove coating & polish brightly after welding |
3 |
Coating Quality |
bright & uniform paint coating, smooth and not sagging, clear font and good adhesion and weather resistance, invariant color |
4 |
Home Features |
make it as per customer's requirement, reasonable settings, fixed solidly and firmly |
5 |
water-resistant & sealing properties |
6—8mm/min Experimental shower does not leak |
6 |
Heating performance |
In the ambient temperature of -40 °C, the room temperature will reach up to 15 °C in 2 hours |
7 |
Refrigeration Performance |
In the ambient temperature of -40 °C, the room temperature will lower down to 28 °C in 2 hours |
8 |
wiring |
With indoor residual current switch, power cord is orderly alignment. When the wire goes through the metal structures point, there should be insulating loop or liner. Reliable connection is between electricity facilities and room body with outdoor grounding bolt-hole |
9 |
Ground Resistance |
≤3 ohm |
10 |
Cold insulation resistance |
Air relative humidity is 45-75% and ambient temperature is 15-35 °C.When the voltage is less than 500V, the cold insulation resistance of every electrical circuit to earth and to each other in AC electrical system must not be less than 6 megohm |
Send Inquiry to This Supplier
You May Also Like
-
Steel Frame House StructureUS$ 10 - 120MOQ: 1 Set
-
Quick Assembled Convenient Thermal Insulation Prefab House Casa Fabricada for Office and HotelsNegotiableMOQ: 1 Set
-
Prefabricated HotelNegotiableMOQ: 2300 Sets
-
Moving ToiletNegotiableMOQ: 1
-
Ware House in ChinaUS$ 1 - 9,999,999MOQ: 1 Cubic Centimeter
-
Hi-tech Prefabbricate Houses Low CostUS$ 1,000 - 50,000MOQ: 1 Set
-
16M2 New Design Prefabricated House Portable House CabinUS$ 2,500 - 4,500MOQ: 2 Sets
-
FRP Pultrusion ChannelNegotiableMOQ: 3000 Meters
-
Magic Home PorterNegotiableMOQ: 1
-
Steel Structure Metal ShedsUS$ 1,300 - 1,400MOQ: 22 Tons