pure coated metalized plastic film

pure coated metalized plastic film

Product photo -  pure coated metalized plastic film

Specification

Laminating film is the composite film with substrate and the thermal adhesive layer coated together to laminate with the desired material (such as print).

Laminating film thickness measured in MIL or MICRON ,affects cost, rigidity, optical clarity and UV inhibition.
Typically laminates are used on both front or back of image for protection, strength and to add rigidity.
The user should also bear in mind that images have a tendency to curl towards the thicker side ,
if laminates are not balanced in thickness.

Features

1) Environmental friendly: non-hazardous to health and safe to use as no toxic gases or volatile content is emitted. Safe in laminating process as no solvent based adhesive is used.
2) High function: compared with other solvent lamination, our film is better in clarity and bonding. It’s preventing lamination from being pressed, bubbled and shredding off easily. Matt thermal lamination film is good for spot UV and hot stamping.
3) Easy handling: it is easy to operate once the required temperature is met and no special technique is required.
4) Efficient and energy-saving: Production is reduced substantially as there is no film wastage, mixture of adhesive solvent, and no UV heating lamp is required.
5) Adaptable to different kinds of machines: This is recommended to be used in dry laminator. Small adjustments need to be made to the machine if the film is used in wet laminator.
6) Strong ability of absorbing power: unlike solvent adhesive, our film is suitable for lamination even with powdery paper

Applications

Covers
Books, magazines, periodicals, brochure, etc.
Packaging
Crates or boxes for liquor, food and beverage, medicine, cosmetics and other daily consumer products and bags etc.
Trade-shows
Advertisement products, Photos, documents, billboards, certificate,etc.  

1. Adjust roller pressure and temperature according to different types of paper and ink. 
2. When using the film for the first time or changing the usual size, a small trial volume before starting massive lamination is proposed. 
3. Normal process temperature is 90C-105C (203F - 221F), roller pressure and temperature vary from different types of paper, ink and machines. 
4. Make sure the ink is dry before laminating. It will delaminate when the paper contains too much moisture or powder. 
5. Make sure to put the material in place with low temperature and dry. 
6. The following situation will affect the final quality of the film during lamination. 
a. Using metal ink 
b. Ink containing too much wax, dried oil, adhesive, silicon additive and so on. 
c. Much too thick ink 
d. Ink completely not dried yet. 
e. Much too humid paper sheet. 
f. Too much powder on the surface

Process Parameter

         1. Equipment for laminating film: dry and wet film lamination machines

         2. Compound Temperature: 

             normal: 85-100℃      special: 100-110℃

         3. Compound Pressure: 8-18MPa

         4. Compound Speed: 8-50m/min

Weight /Measurement

Packaging - pure coated metalized plastic film

Export Worthy for long distance ocean transportation
*One Roll per carton
*Tens of rolls in a pallet
*10 to 12 pallets loaded into 1*20ft container (appro. 13MTs)
*Or 20 to 22 pallets loaded into a 40ft container (appro. 25MTs)

Shipping

Factory Photos- pure coated metalized plastic film

1.Q:Why laminating?

A: Traditional lamination has always been associated with mainly to preserve providing a crystal clear layer of protection and protect the graphics,document,etc from UV fading,moisture and abrasion. Lamination also protects the image from normal wear caused by dirt,pollutants, chemicals and nearly all solvents.

Lamination also makes the graphics,documents,photographs ,etc more colorfast,prolongs outdoor life, brightens colors and adds contrast, especially on electrostatic output.

In addition lamination allows for the ability to print a reverse reading image on paper , then transfer that image to film using a thermal laminator. In all laminating provides choices of use and finishes, regardless of output method.

2.Q:Are you a manufacturer or trading company?

A: Manufacturer,welcome to our factory in Zhengzhou,Henan province of China.

A:Please kindly find the answers as below:

Lead time

MP stage: 30 working days after deposit

Samples: 7days

Payment Term

T/T, L/C,Western Union

Shipment port

Qingdao,Shanghai,Shenzhen,etc.

MOQ: 2mt

4.Q: How could I get samples?
A: You can get our free samples for test,and with collected courier cost in 3 ways as following:

1.RPI (remote pick-up) service upon UPS,DHL,FEDEX,TNT,etc

2.Note your collection account No.of UPS,DHL,FEDEX,TNT,etc

3.Pre-pay and deliver via our cooperative express company to get a low discount.

5.Q: How about the capacity?

A:2 coating lines

20 days delivery of a 40 feet container

350MTs (kilograms) per month

Thickness from 15micron (10BOPP+5EVA) to 32micron (18BOPP+14EVA)

Roll width from 180mm to 1680mm

Roll length from 2000m to 6000m

Reel inner diameter at 25.4mm (1 inch) or 76mm (3 inch)

Reel Outer Diameter: 240mm to 380mm (upon reel length and width)

Laminating films are available in gloss,matt,anti-static, UV(Ultra Violet) protection, Hologram, cold(self seal-using pressure sensitive adhesive),sticky back,etc with different colors and textured and colored patterns. Some films(Cold,Mounting) have adhesive(PSA) on the outside which allows the graphic to be face or back mounted at the point of use offering enhanced UV durability.

Here are some hot sale thermal lamination films as following:

a. Bopp/Pet thermal lamination film        b. Silver Golden metalized thermal laminating film  

ft touch thermal lamination film            d.(transparent)holographic thermal lamination film

     e. Pet thermal lamination pouch film