Home > Products > Swivel Car Seats > WCL turning seat with wheelchair for van and motohome for disabled made in China
WCL turning seat with wheelchair for van and motohome for disabled made in China
- 500 Unit / Units per Month
- Shanghai
- Credit Card
Product Details
Design: | Other | Type: | Other | Certification: | Other |
Lifting Capacity: | 120KG | Lifting Height(mm): | 395 or 300 mm or 250 | Place of Origin: | Jiangsu, China |
Brand Name: | XINDER | Model Number: | WCL-395 | Warranty: | 12 Months |
Product Description
TURNING SEAT &WHEELCHAIR
(WCL-395/WCL-300/WCL-250)
A. INTRODUCTION
WCL turning seat & wheelchair is to bring easy entrance to people with reduced or limited mobility. It can be applied on vans, buses, taxi, ambulance, SUV and etc. You may operate it by remote control and stop it on any position as you desired.
Its load capacity reaches 120kg. This seat works stably, reliably and safely, so you can enjoy the convenience it may bring to you regardless of it safety.
The seat can be removed to wheelchair after it lowered, so that the passenger can go out on that chair.
Product working video: https://youtu.be/4Bvm32GiiOw
B. ADVANTAGES
- Ø Realizing easy entrance of cars, buses, taxi, ambulance and etc.
- Ø Easy operation by driver or user and reliable function;
- Ø Water-proof connectors;
- Ø warning sound during working;
- Ø Working noise < 70dB;
- Ø Every turning seat with serial NO. for easy after-sales track and service
- Ø anti-skip seat step
- Ø warning sound during seat working;
- Ø During seat working, if any barrier, press any key to stop the working; then press key again to start working again;
- Ø with high sensibility to ensure your safety
C. SPECIFICATIONS
Model | WCL-395 | WCL-300 | WCL-250 | |
Dimension | 685*935*350mm | 580*500*350mm | 580*500*350mm | |
Lifting Height | 395mm | 300mm | 250mm | |
Overall Length (fully extended) | 1465mm | 1190mm | 1190mm | |
Base Thickness | 170mm | |||
Drive Mode | electric | |||
Operation | Handheld remote control | |||
Max operating Current | 12A | |||
Rated Voltage | 12V | |||
Own Weight | 80kg | 75kg | 75kg | |
Load Capacity | 120kg | |||
Test Load Weight | 150kg | |||
Working Noise | <70dB | |||
Rotate Angle | 0~113° | |||
Safe Grade | IP67 |
D. Working Time Details
- Ø Time for turning:4~6s
- Ø Time for moving forward: 16~20s
- Ø Time for lowering down: 24~30s
- Ø Time for lifting: 24~30s
- Ø Time for moving backward: 16~20s;
Figure 1 Handheld remote control
E. INSTALLATION NOTES
- Ø Wholly assembled and easy installation
- Ø At the front seat or middle seat of MPV, SUV and so on
- Ø Put seat 50mm near door, and distance between seat front end and door sheet should be over 280mm
- Ø MPV, van, minivan, SUV; camping cars
- Ø Handicapped car;
- Ø Ambulance;
- Ø Installed vehicle models:
F. APPLICATION
Model | Installed Vehicle Models |
S-LIFT-R(copilot with smaller seat) | Nissan NV200, 2003 Honda Odyssey(5 seats), Subaru Forester |
S-LIFT-R (middle seat with larger seat) | Nissan NV200, Honda Elsion, Toyota ALPHARD, Toyota Sienna, Benz Sprinter, Benz Viano, 2012 Honda Odyssey(7 seats), Toyota Previa, Shanghai Huizhong (12 seats) |
Contact Us
- Changzhou Xinder-Tech Electronics Co., Ltd.
- Contact nameLisa Cheng
- Phone86-519-85122329
- AddressNO.1 Kele Rd, Xinbei District, Changzhou,Jiangsu
- Mobile Hydraulic Single Post Car Lift Machine # V-JZD-A-1527
- Motorcycle Hydraulic Scissor Lift Machine on hot sale V-JSMT-A-3007
- Dual Trolley/ In-Ground Pulley Hydraulic Scissor Car Lift #V-JSD-8540
- 5T / In-Ground Heavy Duty Hydraulic Scissor jack car Lift Machine For Parking Garage V-JSZM-D-8350
- ON GROUND INSTALL ULTRA THIN SCISSOR LIFT #V-JSDM-A-8140
- On Ground Install Ultra Air Hydraulic Thin Scissor Car Lift Machine on hot sale #V-JSDB-C-8140
- VICO Car Repair Equipment In-Ground Hydraulic Scissor Car Lift For Tire Maintenance V-JSX-A-3430
- VICO Car Repair Equipment In-Ground Hydraulic Scissor Car Lift For Tire Maintenance V-JSX-A-3430
- VICO On Ground Install / Ultra Thin Scissor Car Lift for sale # V-JSXB-A-3530
- VICO On Ground Install / Ultra Thin Scissor Car Lift for sale # V-JSXB-A-3530
- PORTABLE MID-POSITION SCISSOR LIFT # V-JSZW-3227
- Mobile Mid-Position Hydraulic Scissor Car Lift vehicle scissor lifts V-JSZW-3228
- 4 Ton Car lifts Hydraulic Four Post Parking Lift For Service Station #V-PBT-A-6140
- Hydraulic Four Post Car Lift / Wheel Alignment hoist for Parking lift Equipment Machine V-PBS-C-6340
- 4.5 Ton /Asymmetric One Side Release Floor Clear Vehicle lift Hydraulic Car hoist Lift With CE Certificate V-LZL-M-2240
- Two Post Hydraulic Car Lift Machine Vehicle Lift With Clear Floor Manual Release #V-LZL-E-2240
- Economic Two 2 Post Hydraulic Car Lift Machine With Clear Floor One Side Electric Release For Sale #V-LZL-B-2240
- Hydraulic Car Lift Tyre Repair Machine 4.0 Tons Gantry Two Post One Side Manual Release Lifter 2 post Design # V-LZL-A-2240
- 4T Floor Clear Auto Hoist/ Two Side Manual Release Floor Clear 2 Two Post Car Lift Machine V-LZL-C-2240
- 4 Ton Eight Bended Post With Two 2 post Side Manual Release Hydraulic Car lift V-LZW-E-2140
- 4 Ton One Side Release Two Post Hydraulic Car Lift With CE Certificate V-LZW-A-2140
- 4 Ton One Side Electric Release for Two Post Lift Car Hoist with CE Certificate V-LZW-B-2140
- 4T/Two Side Manual Release Two Post Bilateral Release Hydraulic Car Lifting Machine With Floor Machine V-LZW-C-2140
- Double column lift 3.8t gantry double column lift automobile four column lift
Popular Searches
Recommended Products
- NISSAN Rear Axle leaf springs 55020-2S400、55020-2S401、55020-2S402、55020-2S404、55020-2S405、55020-2S407、55020-2S40A Wholesale
- fit for DENSO diesel common rail injector valve rod 6070
- fit for DENSO diesel common rail injector valve rod 5511
- fit for DENSO diesel common rail injector valve rod 1213
- fit for Denso Injector control valve BF15 Denso Injector control valve 1209043
- fit for Denso Injector control valve 1211813 Denso Injector control valve BF15
- fit for DENSO Injector Control Valve Plate 7# DENSO Injector Control Valve Plate 8#
- fit for DENSO Injector Control Valve Plate 34# DENSO Injector Control Valve Plate 4#
- fit for DENSO Injector Control Valve Plate 29# DENSO Injector Control Valve Plate 31#
- fit for DENSO Injector Control Valve Plate 19# DENSO Injector Control Valve Plate 2#
- Injector Control Valve Plate SF03 Injector Control Valve Plate 8#
- Injector Control Valve Plate 505# Injector Control Valve Plate 507#
Find Similar Products By Category
- Automobiles & Motorcycles > Vehicle Equipment > Car Lifts
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Lisa Cheng
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-