Contact Platform Support
Help CenterGood Quality Induction Heater for Extruder With Engineers Available Service Oversea
Related Products
-
Environment Protection Welding InverterUS$ 800 - 5,500MOQ: 1 Set -
High Efficiency Automatic Welding MachineUS$ 800 - 5,500MOQ: 1 Set
-
Yongda New Technology Magnetic Water Induction Heater for HouseUS$ 560 - 6,000MOQ: 1 Set
-
Latest Version of Magnetic Metal Industrial Induction HeaterUS$ 1,900 - 18,000MOQ: 1 Set
-
Metal Igbt High Frequency Electric Industrial Induction Heater for Sale 160kwUS$ 1,900 - 18,000MOQ: 1 Set
Good quality induction heater for extruder with engineers available service oversea
Applications of electromagnetic induction heater machine:
Electromagnetic induction heating equipment using the principle of electromagnetic induction,converts electrical energy into heat energy. It is widely used in injection molding machine,pipe bending machine,extrusion machine, blown film machine, drawing machine, boiler, hot water boiler and other industries.
Technical paramters of induction heater for extruder
Model |
Power (KW) |
Current(A) |
Input voltage(V) |
Input frequency (Hz) |
YD-35 |
35 |
60 |
Three phase four wire 380V |
50-60Hz |
YD-45 |
45 |
90 |
Three phase four wire 380V |
50-60Hz |
YD-65 |
65 |
120 |
Three phase four wire 380V |
50-60Hz |
YD-85 |
85 |
160 |
Three phase four wire 380V |
50-60Hz |
YD-120 |
120 |
200 |
Three phase four wire 380V |
50-60Hz |
Advantages of induction heater for extruder:
Using electromagnetic induction heating can improve energy efficiency, heating speed and temperature control accuracy, is more advantageous to the improvement of product quality, and also saving energy and reduce the cost, so more and more widely accepted and used.
Transforming flow:
1. Remove the original electric lap
2. Measuring the actural size of the heating cylinder(diameter,length)and obstructions size
3. Heated object wrapped in a layer of insulation material
4. According to the equipment heating requirments around a certain amount of high temoperature wire
5. High-temperature wire and the input lines of induction heating host machine connected, to the security complete.
Application case
More induction heating applications
Product quality certifications: ISO9001-2000
Pre-sale service:
We will recommend the most applicable equipment for customers according to your work piece processing demands.
In-sale service:
(1) We will strictly produce the equipment according to relevant technical standards.
(2) We will take run test according to relevant equipment test run regulations.
(3) We will strictly inspect the equipment before delivery,only good machine will be sent to customers.
(4) We will send goods as scheduled in the contract.
After-sale service:
(1) We will freely guide installation, commissioning and test run,by sending intall drawings, sometimes calling or send email.
(2) We will execute one-year guarantee period (ex. not include normal wear, damages of wearing parts and parts damages caused by improper operation).
(3) Once there is a trouble during quality guarantee period, our company promises that we will promptly appoint engineer and sales to help, make our efforts to remove troubles and guarantee the normal operation of customers.
(4) We will freely replace all equipment parts during guarantee period. After-sale products archives and life-long repair solve the potential problems of customers.
(5) Provide long-terms technical support. Also for different work pieces , give instructions and help about how to produce inductors.
(6) According to customer’s need, can arrange engineer to install ,test machine and training operators.
(7) After guarantee period, customer can buy machine parts from us with very low cost.
Packing for induction heater for extruder
1.Two wooden cases(plywood) for packing induction heating equipment
2.Accessories: induction coils,foot switch and installing and operating instructions
3.Shipping: by sea LCL(less than container load) or by air.
What’s your MOQ? |
Any quantity of machine will be accepted. MOQ:1 Set |
Which place your factory is located? |
We are located in Shenqiu County, Zhoukou city, Henan Province ,China |
How far from Beijing? I think it is more closer to Shanghai |
Our factory is near both and Shanghai. We have office in Zhengzhou, we can pick up you at Zhengzhou CGO airport,and then to our factory via expressway about two hours. |
We need to see some more videos for production line and also pictures of your factory, water drawing and panel drawing |
Well, we have many videos show our customer’s machine working scene(Various of applications: forging,hardening, brazing, shrink fitting, melting and hot coating etc. According to your work piece processing requirements,) send you the corresponding video link or send by email. 2. Yes, we can provide you factory pictures and machine water connection and control panel details. |
Do you have quality certifications? |
Yes, we got the ISO9001:2000 International quality management system certification in August,2001, |
How do you packing the machines? |
Standard export wooden cases(plywood) Usually every set machine will be used two wooden cases: one for packing induction heating generator, one for packing transformer. Inside will be filled with plastic foam for waterproof and shockproof |
More questions….? |
Updating… |
If you are interested in induction heater for extruder, pls feel free to send us inquiry or chat online. Thanks for your reading ! Welcome to contact us !
Send Inquiry to This Supplier
You May Also Like
-
Efficient Copper Cable Granulator for Scrap Wire RecyclingNegotiableMOQ: 1 Set
-
40T Electric Tilting Machine for Heavy Parts RotationNegotiableMOQ: 1 Set
-
Noise-reducing Metal Shredder Low-noise Metal Scrap Shredding Machinery for FactoriesNegotiableMOQ: 1 Set
-
Automatic/manual Fluidized Bed Dip Powder Coating Equipment Line for Refrigerator Shelves ProductionUS$ 2000 - 40000MOQ: 1 Set
-
Vertical Scrap Metal Baler With 5.5kW Motor & Safety Lock SystemNegotiableMOQ: 1 Set
-
Automatic Gabion Basket Wire Mesh Forming and Welding MachineNegotiableMOQ: 1 Set
-
Metal Zipper Chemical Cold Plating Machine (13 Tanks)US$ 1,000 - 10,000MOQ: 1 Set
-
Made In China JOY 1330/1325 Portable Air Plasma Cutting MachineUS$ 2,000 - 6,900MOQ: 1 Set
-
Automatic Infrared Length Cutting SystemNegotiableMOQ: 1 Set
-
Factory Supply Stainless Steel Sheet Polishing MachinesUS$ 2,000 - 5,000MOQ: 1 Set
