PVC door and window profile machinery

Specifications

PVC door and window profile machinery
1. produce upvc window profile
2. double screw extruder
3. turn-key project

   PVC door and window profile machinery

1. produce upvc window profile
2. double screw extruder
3. turn-key project

 

The unit is optimized in design, referring to the newest foreign technology. The unit has the advantages of even plasticizing, small velocity of cutting, high output, long service-life and so on. The unit is composed of conical double-screw extruder, vacuum calibration table, haul off, cutter, foil machine, stackrack, etc. The main machine adopts thefrequency changer or the silicon-controlled rectifier directcrrent velocity modulation.The temperature control meter adopts the import or the joint calital product. The vacuum pump of the auxiliary parts and hauling motor both adopt high-quality products. The maintenance is simple and convenient. The unit is also able to direct extrude artificial wood foamed profile material. The result is better than that of the single-screw extruder. The plastics-steel door and window profile production line adopts conical double-screw extruder, which process PVC door and window profile materials, plastics-steel compound material, multiple-hole wire pipes, decoration profiles and so on.

 

Main applications:

 

This pvc profile extrusion line is composed of cone twin screw extruder, vacuum calibration tank, haul-off, cutter, stacker, and also coordinated with different profile break-section and mould to produce PVC door&window profile,indoor floor, decoration plate material, profile and multi-hole wire plastic products etc.

 

This extrusion line also can be used to produce wpc profile extrusion line WPC Machine can be used after recycling, and has been widely used in fields of floor, guard bar, tray, packing cases, partition board, window and door sheath, skirting line, etc.   

 

 

Main technical parameter:

 

Type	YF-180	YF-240	YF-700	YF-1000
Section bar width(mm)	180	240	700	1000
Length of vacuum calibration tank(mm)	2500	6000	6000	8000
Degree of vacuum(Map)	-0.08-0.09	-0.08-0.09	-0.08-0.09	-0.08-0.09
Traction speed(m/min)	0.5-0.4	0.5-0.4	0.3-3	0.2-1.0
Cutting saw diameter(mm)	400	450	300	320
Total power(kw)	42	98	180	250
Length of line(m)	20	25	35	45

 

 

PVC window profiles:

 

 

 

 

 

 

 

Also used for producing the wpc window profiles