2.8 inch TFT-LCD Multi function CCTV security Tester RTS-321

Specifications

CCTV security Tester
1. 2.8"LCD display screen
2. Control PTZ protocol
3. Network cable testing
4. Chinese / English

                 2.8 inch TFT-LCD Multi function CCTV security Tester  RTS-321 

 

2.8 inch High definite LCD Chinese display + PTZ controller + image producer+ network cable testing function

 

The tester is a professional testing tool which is exploited for video monitory scenes installation and maintain. It's have multi functions including display video, PTZ control, image producer, and network cable testing. It's simple and easy for operation, convenient for carry, economical for save money, is a good assistant for workers.

 

Application Area:

Video monitoring projects installation and maintain

High speed Dome camera testing and camera testing

Transmission channel testing of video

Control PTZ protocol

 

Features:

2.8 inch digital LCD display screen, 960 X 240 resolution

Low power consumption, 10 hours working timeChinese / English operate menu, simple, easy and beautiful

The brightness, contrast ratio, color saturation are adjustable

NTSC / PAL auto identify and adjust

Image producer can sent various modes of color images (white, yellow, cyan, green, pink, red, blue, black )

Catch and display PTZ control protocol code Enhanced network cable testing function, can testing any two or more connect linear ordering, and display cable number

Support more than 20 kinds of protocols,  including Pelco-D, Pelco-P, Samsung etc.

Support RS232, RS485 ports, speed rate 150 ~ 19200/bps

Built-in Lipo battery to supply power, more convenient and stable

Small and simple, image display and data control at the same time

Professional design, easy for carry and use, operator almost can use it directly without training

One person can operate it to finish the testing, aim and focus of camera, you can test and verify every camera and needn't to back to monitoring center, save your time and improve working efficiency.

 

Tester Data:

VIDEO SIGNAL TESTING
Video mode:	PAL / NTSC auto adjust
Video signal:	1Vpp
Display screen:	2.8 inch LCD color display screen,  960 X 240 resolution
Display screen adjust:	The brightness, contrast ratio, color saturation are adjustable
Video input:	1 BNC isolation input
Video output:	1 BNC drive output
PTZ CONTROL TESTING
Communication port:	Support RS323, RS485 at the same time
Communication protocol:	Compatible with more than 20 kinds of protocols: Pelco_D, Pelco_P, Samsung, Panasonic, Lilin, Yaan etc.
Baud rate:	150, 300, 600, 1200, 2400, 4800, 9600, 19200 bps
COLOR IMAGE PRODUCER
Video signal producer:		Through video out port, sent color image video testing signal
UTP NETWORK CABLE TESTING
Network cable testing:		Testing any two or more connect linear ordering, and display cable number
PROTOCOL CODE CATCHING
Protocol code catching:		Can receive and display RS485 / RS232 protocol data from control equipment
POWER
Power supply:	DC 5V  (2A)
Battery supply:	Built-in Li-ion battery of 3.7V, capacity 2000mAh
Charging:	Need 3 ~ 4 hours to charging, and can use 10 hours after full charging.
Save power function:	Low power consumption, auto stand by can save power, it's can display battery data
SYSTEM DATA
Operating set:	Chinese / English OSD menu, optional
Auto stand by:	Turn off / 5 ~ 60 minutes
Keyboard voice:	ON / OFF
OTHER DATA
Working temperature:	-30°C ~ +70°C
Working humidity:	30% ~ 90%
Size:	170mm(L) X 99mm(w) X 48mm(H)