Scrap tire recycling system micro rubber powder grinder

Quick Details:
 
This machine is a specialtire tyre  recycling machine for crushing the whole waste
steel wire radial tyre under normal temperature. The tyre rubber chips are less
than 50x50mm.
 
Tire shredder is one of the main euipment of tire recycling line. It use to broken
whole waste tires, output size is 5-7cm tire pieces.
 
There are two model of tire shredder, zps-900 and zps-1200.
 
1. ZPS-900 can broken whole waste tire that the tire diameter under 900 mm,capacity is
1.5-2t/h.
2. ZPS-1200 can broken whoel waste tire that the tire diameter under 1200 mm capacity
is 34t/h. you can choose according to you need.
3. Tire shredder main structure, main including  motor, reducer, broken room, cutter disk
groups, rotating screen, conveyor and so on.
4. The main advantage tire shredder has a compact structure, advanced technology,
low energy consumption, high efficiency, the grinding chamber is split test structure,
maintenance is particularly convenient features.
 
 
Use:
 
This machine is a special equipment for crushing waste steel wire radial tyre
under normal temperature, used for take out the steel wire of tyre in the scope
of the size.
 
 
Characteristic:
 
This machine has the structure compact, advance technology, low powder
consumption, high efficiency, crushing room with off-structure. Easy to
maintenance etc. The machine adopting excellent hard alloy steel as it
blade, highly hard and wearable is druable; circle mesh screen has
grindding structure, dropping pieces with large area is good for the rubber pieces.
 
 
Specifications:
 

 
 
Application 
 
This equipment is mainly used for crushing general tires with diameter of less than 
1200mm   and all steel radial tires into rubber blocks/ chips of 50~80  millimeter.
 
 
The main criteria to decide whether the scarped-tire-recycling complete
production line is advanced or not:
 
1, The core equipments such as rubber fine grinder, tire shredder, shearing-styled
crusher, have good performance.
2, The expendable parts of core equipment, such as cutting head, blade, millstone,
have long service life.
3, In the same capacity and size of discharge materials, the total install power of
complete production line is low.
4, In the same capacity and size of discharge materials, the staffs operating complete
production line per shift is few.
5, In the same capacity and size of discharge materials, the occupied area of complete
production line per shift is small.
6, The pollution-proof and dust-remove devices which are applied in the complete production
line is advanced.

Quick Details:
 
This machine is a specialtire tyre  recycling machine for crushing the whole waste
steel wire radial tyre under normal temperature. The tyre rubber chips are less
than 50x50mm.
 
Tire shredder is one of the main euipment of tire recycling line. It use to broken
whole waste tires, output size is 5-7cm tire pieces.
 
There are two model of tire shredder, zps-900 and zps-1200.
 
1. ZPS-900 can broken whole waste tire that the tire diameter under 900 mm,capacity is
1.5-2t/h.
2. ZPS-1200 can broken whoel waste tire that the tire diameter under 1200 mm capacity
is 34t/h. you can choose according to you need.
3. Tire shredder main structure, main including  motor, reducer, broken room, cutter disk
groups, rotating screen, conveyor and so on.
4. The main advantage tire shredder has a compact structure, advanced technology,
low energy consumption, high efficiency, the grinding chamber is split test structure,
maintenance is particularly convenient features.
 
 
Use:
 
This machine is a special equipment for crushing waste steel wire radial tyre
under normal temperature, used for take out the steel wire of tyre in the scope
of the size.
 
 
Characteristic:
 
This machine has the structure compact, advance technology, low powder
consumption, high efficiency, crushing room with off-structure. Easy to
maintenance etc. The machine adopting excellent hard alloy steel as it
blade, highly hard and wearable is druable; circle mesh screen has
grindding structure, dropping pieces with large area is good for the rubber pieces.
 
 
Specifications:
 

 
 
Application 
 
This equipment is mainly used for crushing general tires with diameter of less than 
1200mm   and all steel radial tires into rubber blocks/ chips of 50~80  millimeter.
 
 
The main criteria to decide whether the scarped-tire-recycling complete
production line is advanced or not:
 
1, The core equipments such as rubber fine grinder, tire shredder, shearing-styled
crusher, have good performance.
2, The expendable parts of core equipment, such as cutting head, blade, millstone,
have long service life.
3, In the same capacity and size of discharge materials, the total install power of
complete production line is low.
4, In the same capacity and size of discharge materials, the staffs operating complete
production line per shift is few.
5, In the same capacity and size of discharge materials, the occupied area of complete
production line per shift is small.
6, The pollution-proof and dust-remove devices which are applied in the complete production
line is advanced.