CCTV Tester for image displaying and wire tracking

• Transmitter audio signal is connected with the target wire while tracing withiRJ11 interface, which generate a close loop audio signal field around the target wire loop, and the receiver will pick up the signal at the loop or the other end of the wire to find the target wire. This method features long distance and clear sound which helps the users to find the target wires effectively and quickly. 
• In testing the camera the device display the images on the screen via its signal cable so that angle and range of the camera will be adjusted to the best position. 
• This device finds wide application in fields of camera amounting and wire tracing.

   

  Features:

  1. image display
  2. audio output
  3. wire tracing
  4. charge and charging indication
  5. low battery alarming
  6. automatically turn off
  7. flashlight function
  8. earphone output
  9. wire tracing sound level adjustable

  Specification:

   

  1. 2.0 inches TFT LCD
  2. automatic PAL/NTSC identifying
  3. 12V 500m emergency power output, with short circuit protection
  4. This device will turu off automatically within 8 minutes if there is no further operation of the key
  5. 1KMwire tracing distance: over 1 Km
  6. 3 built-in batteries of 3.7V 350mah
  7. 15V 1A power adaptor of 15V 1A

   

  Specification	Transmitter	Receiver
  Weight	132.2G	59.2G
  Size	64 * 31 * 118.9mm	48.6 * 26 * 117mm
  battery	3 * 3.7V lithium battery	6F22 9V battery
  Hunt signal transmission distance	> 1Km
  display Mode	2.0 inches TFT LCD screen
  Environmental Operating Temperature	-10 ~40℃ (14 ~ 104℉)
  Relative humidity	10-95% RH
  Storage temperature	-20 ~ 60℃ (-4 ~ 140℉)

Q:What’s the MOQ ?

Answer: Usually speaking, we do not set MOQ since we want to do business with any business type, including retailer and wholesaler.   

Q: How do you deliver the goods ?

Answer: We send by sea or by air including DHL,FedEx,TNT,UPS etc.

Q: What’s you main payment terms ?

Answer: T/T,Paypal ,western union and trade assurance is welcome to us.

Q:Can you do private label ?

Answer: Yes, of course. OEM is absolutely supported; both on package or devices. 

Q:What certifications do you have ?

Answer: All electronic products are with CE & RoHS certificates. 

Q:How can I get a sample ? What’s the sample fee? Is it refundable ?

Answer: Please confirm with us the model you’ll purchase, and you prepaid the sample fee , after sample tested and qualified, we will refund this sample fee when you place the bulk order. We can send out the sample within 2 working days after receiving payment. 

Q:What’s the lead-time ?

Answer: Normally it takes 3-5 working days after receiving payment. 

Q:Do you have in stock ?

Answer: Yes, we usually hold some quantities in stock, such as 100pcs or 200pcs are ready to ship immediately. 

Q:What about your after-sales services ?

Answer: We have 100% QC before shipment. If there are some unexpected problems happen, we hope to solve these problems with our customers through friendly ways as below:

1, If it’s quality problem, customers must provide photos or videos and other evidences to us for identify. After confirmation, we’ll send the new products to replace the damages in next order.

2, If it’s man-made damaged, customers should take full responsibility.