Contact Platform Support
Help CenterTextile Printing Thickener
Related Products
-
Modified Starch/a Substitute for Alginate Sodium in Textile Printing IndustryNegotiableMOQ: 1 Metric Ton -
Modified Starch TGS5-C Disperse Printing Starch PowderNegotiableMOQ: 1 Metric Ton
-
Starch Ether Cement AdditiveNegotiableMOQ: 1 Metric Ton
-
Modified Starch TGS5-C (Disperse Dye Printing Thickener)NegotiableMOQ: 1 Metric Ton
-
Thickening Agent For Textile PrintingNegotiableMOQ: 1 Metric Ton
Specifications
Modified Starch Textile Printing PasteEasy printing paste formation
Good rheological property
Good resistance to electrolyte
CBH are in the position to offer two kinds of Modified Stach:
- Modified Starch (TGS5-C)
- Modified Starch (TGS5-D)
Our Modified Starch (TGS5-C) is featured with:
- Easy printing paste formation
- Good rheological property
- Free from preservative
- Good resistance to electrolyte
Application:
Thickener for printing paste, specifically for
- disperse dye printing
- rayon discharge printing
- nylon spandex fabric printing
Specification:
- Appearance: White or off-white granulars
- Solubility: Swelling in cold water
- pH: 10-12.5
- Viscosity (8% solution): ≥35,000 mPa.s (by BH viscometer)
- Ionicity: Anionic
- Moisture: ≤14%
Preparing of printing paste:
Dosage: 7-8%
Add the modified starch powder into water while stirring. Rest the paste for 3-4hours, and then stir a few serve, the paste is ready for use.
Notice: The longer rest time during preparation, the better leveling performance of the paste.
Our Modified starch (TGS5-D) is featured with:
- Easy printing paste formation
- Good rheological property
- Free from preservative
- Good resistance to electrolyte
Application:
Thickener for reactive dye printing paste
Specification:
- Apprearance: White or yellowish granulars
- Solubility: Swelling in cold water
- pH: 10-12.5
- Viscosity (10% solution): 12000-18000 BU
- Ionicity: Anionic
- Moisture: ≤14%
Preparing of printing paste:
Dosage: 7-8%
Add the modified starch powder into water while stirring. Rest the paste for 3-4hours, and then stir a few serve, the paste is ready for use.
Notice: The longer rest time during preparation, the better leveling performance of the paste.
Send Inquiry to This Supplier
You May Also Like
-
Other Printing MaterialsNegotiableMOQ: 2600 Sets
-
Rubber Plastic Blade ScraperUS$ 1.85 - 3.5MOQ: 1 Piece
-
News Printing PaperUS$ 340 - 390MOQ: 40 Metric Tons
-
M2000 Stitching Head PlateUS$ 1 - 10MOQ: 1 Piece
-
Carbonless Paper With Hole and ClawUS$ 20 - 35MOQ: 100000 Sets
-
PET Film Grey Back Roll Weight 340gsm 440gsm 91cm Wide For Banner StandUS$ 53MOQ: 50 Rolls
-
Cast Mirrow Coated Paper Jumbo Roll Hot Melt Adhesive Glassine Liner For Barcode Food Commodity Label Raw MaterialUS$ 0.21MOQ: 10000 Cubic Meters
-
Crystal/WT-T01: Crystal Film Acrylic Film Photo Protection Film Cold Lamination Film for Wedding Album Wedding Frame Wall Frame Laminated RollNegotiableMOQ: 1000 Square Meters
-
Lucky Cat Car Perfume Car Air Conditioner Outlet Perfume Cartoon Cute Creative Car Fragrance DecorationUS$ 9.03 - 9.04MOQ: 5000 Pieces
-
Aluminum Silk Screen Printing Frame With/Without Mesh High-Quality Printing MaterialsUS$ 10 - 20MOQ: 5 Pieces
