Contact Platform Support
Help CenterModified Starch/a Substitute for Alginate Sodium in Textile Printing Industry
Related Products
-
Modified Starch TGS5-C Disperse Printing Starch PowderNegotiableMOQ: 1 Metric Ton -
Starch Ether Cement AdditiveNegotiableMOQ: 1 Metric Ton
-
Modified Starch TGS5-C (Disperse Dye Printing Thickener)NegotiableMOQ: 1 Metric Ton
-
Thickening Agent For Textile PrintingNegotiableMOQ: 1 Metric Ton
-
Textile Starch For Printing IndustryNegotiableMOQ: 1 Metric Ton
Specifications
Modified Starch Textile Printing PasteEasy printing paste formation
Good rheological property
Good resistance to electrolyte
CBH are in the position to offer two kinds of Modified Stach:
- Modified Starch (TGS5-C)
- Modified Starch (TGS5-D)
Our Modified Starch (TGS5-C) is featured with:
- Easy printing paste formation
- Good rheological property
- Free from preservative
- Good resistance to electrolyte
Application:
Thickener for printing paste, specifically for
- disperse dye printing
- rayon discharge printing
- nylon spandex fabric printing
Specification:
- Appearance: White or off-white granulars
- Solubility: Swelling in cold water
- pH: 10-12.5
- Viscosity (8% solution): ≥35,000 mPa.s (by BH viscometer)
- Ionicity: Anionic
- Moisture: ≤14%
Preparing of printing paste:
Dosage: 7-8%
Add the modified starch powder into water while stirring. Rest the paste for 3-4hours, and then stir a few serve, the paste is ready for use.
Notice: The longer rest time during preparation, the better leveling performance of the paste.
Our Modified starch (TGS5-D) is featured with:
- Easy printing paste formation
- Good rheological property
- Free from preservative
- Good resistance to electrolyte
Application:
Thickener for reactive dye printing paste
Specification:
- Apprearance: White or yellowish granulars
- Solubility: Swelling in cold water
- pH: 10-12.5
- Viscosity (10% solution): 12000-18000 mPa·s
- Ionicity: Anionic
- Moisture: ≤14%
Preparing of printing paste:
Dosage: 7-8%
Add the modified starch powder into water while stirring. Rest the paste for 3-4hours, and then stir a few serve, the paste is ready for use.
Notice: The longer rest time during preparation, the better leveling performance of the paste.
Send Inquiry to This Supplier
You May Also Like
-
Fluorescent Red GGNegotiableMOQ: 1 Kilogram
-
Hot Product Basic Black Basic Dyes for Paper DyeingUS$ 9 - 10MOQ: 1 Tonne
-
HRX-RL-P912 Blue Good Candle DyeUS$ 30 - 85MOQ: 50 Kilograms
-
High Quality Dye C.I.Basic Violet 10 (CAS NO. 81-88-9) Rhodamine BUS$ 1 - 100MOQ: 500 Kilograms
-
Refined Tamarind PowderUS$ 800 - 900MOQ: 12 Tons
-
Pigment Blue 15:3US$ 7 - 15MOQ: 1 Kilogram
-
Leather Edge OilNegotiableMOQ: 100 Tons
-
Basic Green 4, Malachite Green Crystal, 312 Malachite Green CrystalsUS$ 4 - 15MOQ: 25 Kilograms
-
Direct Blue 71 100% (rayon Fabrics Dyestuff)NegotiableMOQ: 300 Kilograms
-
Large Stock Offset Ink Sublimation for Offset PaperUS$ 18 - 35MOQ: 1 Kilogram
