Home > Products > LIQUID NAILS > Liquid nail and no more nail adhesive
Liquid nail and no more nail adhesive
- 0 per Month
- multi- purpose rubber plane best paint sealant for black cars
- modified starch good price
- anti-fungus silisone sealant for sanitary usage as bath and kitchen
- NFION NF150-450S 4W 5W heat dissipation silicone pad air gap filler thermal pad gelid 2mm thermal transfer gelid extreme thermal pads
- NFION NF150-500 5W/M.K High Puncture Resistance Low-Temperature Resistance Thermal Conductive Pad For Industrial Machinery Cooling
- NFION NF150-300N High Reliability Thermal Silica Gel
Product Details
CAS No.: | 7085-85-0 | Other Names: | construction adhesive | MF: | Mixture |
EINECS No.: | 230-391-5 | Place of Origin: | Guangdong, China | Classification: | Volatile Solvent Adhesives |
Main Raw Material: | Other, synthetic rubber | Usage: | Construction, Other, Construction, Decoration construction | Brand Name: | Positive |
Model Number: | PT-Liquid Nails-B |
Product Description
High Strength Construction Adhesive-Liquid Nails
Description:
Positive Liquid Nails Adhesive with extremely adhesive force and bonding ability, is aimed to replace the metallic nail as general-purpose adhesive, and it doesn’t require drilling holes for fixing and bonding materials such as wood, MDF board, gypsum board, stone, concrete, ceramics, metal, plastic, rubber and so on.
Features:
J Strong bonding property, high bonding strength;
J High flexibility, bonding power not affected by shrink of building;
J Wide application range, suitable for most of materials, even wet wood;
J Suitable for filling gaps, cracks; Painting can be done after adhesive hardens;
J Excellent weathering-resistance, water-proof property;
J Non-toxic, no pollution, free of hazardous substances like benzene, formaldehyde, etc.
Application:
JSurface preparation: Bonding surface should be clean and free of dust and rust.
JCut up the tube top, put the adhesive mouth and squeeze out the adhesive by sealing gun.
JDry Bonding:(suitable for light materials & joints for light pressure)
Squeeze out the adhesive in form of “Z” ,line distance about 40cm. Apply to material A, then press to bonding area B lightly, wait for a few minutes about 5~8 minutes, then press the two surfaces with strong pressure.
JWet Bonding:(Suitable for heavy materials)
Apply the adhesive same way as above, then clamp or fasten up the two materials by tools like pliers, screws to maintain maximum surface contact at bonded interfaces. Fix and wait for 24 hours till the adhesive dries, then remove the fixing tools. The adhesive is movable within 20 minutes since bonding, becomes stronger 2~3 days after bonding, reaches best performance till 7 days.
Notes:
JBefore adhesive hardens, it can be removed with turpentine.
JAfter adhesive dries, it can be removed by scrape or rubbing.
JSuitable for paving floor board.
J Adhesion power will be weakened under high temperature. Avoid bonding metal exposed to sunshine for long time.
Storage:
J Keep it out of direct sunlight and store in cool, dry and ventilated place.
J Keep the tube securely sealed.
J Discharge the waste adhesive only after it becomes totally dry.
J Don't pour into water tubes.
RFQ
Q1:What ‘s your product range?
- Contact adhesive
- PVA white glue
- Silicone sealant
- No more nail
- Electronic white glue
Q2: Are you a manufacture?
Yes,we have beening in providing professional solutions on adhesive industry 20 years from 1995.
Q3: Do you have stock products to sell?
No,we work on ODM or OEM orders. That’s means size, material, quantily, design, packaging, solution ,etc will depend on your requests.
Q4:What information should I let you know if I want to get a quotation?
- The size of packing.
- The material & component data.
- The quantity.
- The certificate you need.
- If it is prossible , please also provide with picure or design for checking. Sample will be best for charifying.If not ,we will recommend relevant products with detail for reference.
Q6:How many days will samples be finished? And how about the lead time of production?
Grenerally,3-5 days for samples making.The lead time of mass production will depand on quantity, production art etc.10-15 working days for 10 Tons.
Contact Us
- Jiangmen Yiyuan Biochemistry Engineering Co., Ltd.
- Contact nameZone Becky
- Phone86-0750-3869373
- Addressfuxing load 18th Jiangmen,Guangdong
ALL PURPOSE ADHESIVE SERIES | EPOXY TILE GROUT | LIQUID NAILS | New Products |
SILICONE SEALANT | TRANSPARENT NAIL | WATER BASE WHITE GLUE SERIES |
- NFION NF150-400 High Thermal Conductivity Silicone Pad for Efficient Heat Dissipation in Electronics and GPU CPU Applications Can Be Die Cut To Any Size Thermal Pads
- NFION NF150-300 thermal conductive pad conductivity 1W 3W 5W 10W/m.K for LED light
- NFION NF150-100GZ Factory Selling Directly High Voltage Paste Roller Nanometer Thermal Conductive Grease
- NFION NF150-200N One Component Thermally Conductive Gel For Filling Large Gap Tolerances
- CPU Heatsink Cooling 3.8W Thermal Conductive Grease thermal conductive gap filler
- NFION NF150-800 thermal pads replacement CPU/GPU Thermal Pad 8W/m.k 0.5mm 1mm 2mm 2.5mm 3mm 4mm 5mm 6mm 7mm electric laptop heatsink
- NFION NF150-150NJ Hot Sale Two-part Thermal Conductive Sealant Gel Thermally Conductive Gel
- NFION NF150-800 High-Heat-Transfer Silicone Thermal Interface Pad Highly Thermal Conductive Transfer Sheet Electric Cooling Pad
- Halal certificate high quality animal glue pearl bone glue 100bloom industrial gelatin price from animals
- Factory direct supply customized service hot melt adhesive industrial gelatin bone glue for sandpaper industry
- customized viscosity gelatin 230 bloom industrial industrial gelatin hide glue industrial gelatin for paintball
- High viscosity hot melt adhesive industrial gelatine glue powder industrial gelatin for copper
- NFION NF150-1000 High-Heat-Transfer Silicone Thermal Interface Pad Highly Thermal Conductive Transfer Sheet Electric Cooling Pad
- NFION NF150-150J thermal conductive pad conductivity 1W 3W 5W 10W/m.K for LED light
- NFION NF150 thermal conductive pad conductivity 1W 3W 5W 10W/m.K for battery pack
- NFION NF150-200 thermal conductive pad conductivity 1W 3W 5W 10W/m.K for LED light
- NFION NF150-200B High-Heat-Transfer Silicone Thermal Interface Pad Highly Thermal Conductive Transfer Sheet Electric Cooling Pad
- NFION NF150 thermal conductive pad conductivity 1W 3W 5W 10W/m.K for battery pack
- China manufacture Injection nozzle G.NPL. BH-R1/4 for Bangladesh Power Station
- technical support available hot melt adhesive fast drying speed glue cover bookbinding jelly glue for full automatic machine
- technical support available hot melt adhesive book binding animal hide glue jelly glue for luxury gift box manufacturer
- High viscosity glue industrial gelatin adhesive glue for veneer wood industrial gelatin paper making
- anti-settling agent thixotropic agent for coating and ink
- Dairen Chemical VAE Emulsion DA-104 EVA Dispersion Adhesive
Popular Searches
Recommended Products
- zeolite 5A molecular sieves adsorbents for PSA nitrogen separation and purification
- zeolite 13X molecular sieves for liquid petroleum gas drying and removal of odor and h2s
- Zeolite 4A molecular sieves for liquid coats and paints deep dehydrating
- lithium molecular sieves for PSA nitrogen and oxygen adsorption separation
- oxygen molecular sieve 13X-HP for PSA nitrogen and oxygen air separation purification
- CAS 64-02-8 Anhydrous ethylenediamine tetraacetate tetrasodium Can be used in textile industry dyeing paper and other industries
- CAS 111-46-6 Diethylene glycol ether 2 2 -oxyethylene glycol Used as extractant insulation agent softener and solvent etc
- CAS 110-98-5 Dihydroxydipropyl ether Dipropylene glycol Used as an intermediate in organic synthesis
- CAS 26172-55-4 Cason Methyl chloroisoxazolone Widely used in industrial water treatment swimming pool water treatment and so on
- CAS 51981-21-6 N n-bis (carboxymethyl) -L-glutamate tetrasodium salt Other chemical products
- CAS 683-10-3 Lauryl betaine N-carboxymethyl-n n-dimethyl-dodecylammonium salt Other chemical products
- CAS 122-20-3 Tri (2-hydroxypropyl) amine triisopropanolamine used as gas absorbent antioxidant and so on
Find Similar Products By Category
- Chemicals > Adhesives & Sealants
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Zone Becky
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-