USB Active Repeater Cable 5 Meter

Specifications

USB Active Repeater cable 5 Meter

Active USB 2.0 extension Cable

Features :

Compliant with USB 2.0 High Speed (480Mbps)
USB extension cable, ensures good signal quality to meet USB2.0 specificationExtend USB signal up to 10Meter
Plug-and-play ,no additional drivers required
Gold-plated connector
USB bus powered
Support Win98/2000/XP/Vista/7, Mac OS, and Linux

USB Repeater Active Extension Cable

It's not passive extension cable, it's an active device. The USB signals going in and out of the extension cable are buffered to assure signal quality and the meeting of the USB's electrical and timing specifications. Using passive cables for the purpose of extension will result in signal errors and is not recommended.

USB extension cable allows a USB device to have its cable length extended 16ft. The USB extension cable acts as a USB hub and buffers all downstream and upstream data traffic. High speed, full-speed and low-speed devices will function equally well with the USB extension cable.

You can link up to 5 of active repeater cables together without signal degradation, which is about 80 Feet long.

Features

• Active USB repeater cable, assure good signal quality to meet USB specification, extend up to 80' (serially connecting up to 5 cables) without signal degradation.
• Full compliance with USB spec version 2.0/1.1
• Support 480 Mbit/s high speed, "12Mbit/s Full speed" and "1.5Mbit/s Low speed"
• One upstream port and One downstream port
• Supports Windows 98/98SE/ME/2000/XP , Mac OS V9.0 or higher
• Supports Plug & Play and hot-swap functions
• Bus power mode
• Support EHCI/UHCI/OHCI interface
• Cable length: 5M or around 16 Feet