China Manufacturer alloy N08367 AL-6XN pipe

Specifications

China Manufacturer alloy N08367 AL-6XN pipe
Item
Alloy N08367 / AL-6XN pipe
Standard
UNS,EN,ASTM

China Manufacturer alloy N08367 AL-6XN pipe

  

Item
Alloy N08367 / AL-6XN pipe

Standard
UNS
EN
ASTM

Surface
2B,BA,NO.1,NO.4,NO.8,8K,mirror,polished,etc.

Thickness
0.3mm-40mm SCH5S - XXS

Outer diameter
6mm-2000mm

Length
at your request

  

Typical Application
Reverse osmosis desalination equipment and pumps
FGD Scrubbers
Chemical process tanks and pipelines
Seawater heat exchangers
Tall oil distillation columns and packing
Offshore oil and gas production equipment
Pulp bleaching plant washers, vats, press rolls and pipelines

Design Features
High resistance to pitting, crevice and general corrosion.
Very high resistance to chloride stress corrosion cracking.
50% stronger than 300-series austenitic stainless steels.
Excellent impact toughness.
Excellent workability and weldability.

Package
Export standard package: bundled wooden box or be required;

C	Cr	Cu	Mn	Mo	N	Ni	P	Si	S	Fe
0.02	20.5	0.1	0.40	6.3	0.22	24.0	0.025	0.40	0.002	Balance

  

GENERAL PRTIOPERES
The AL-6XN alloy is a superaustenitic stainless steel which was developed by Allegheny Ludlum Corporation. It exhibits far greater resistance to chloride pitting, crevice corrosion and stress-corrosion cracking than exhibited by the standard 300 series stainless steels, and is less costly than the traditional nickel-base corrosion resistant alloys.

The AL-6XN alloy has exhibited good performance in variety of highly corrosive environments. The AL-6XN alloy is available in a wide range of product forms including plate, strip, sheet, bar, billet, tubing, pipe, and castings. Its various product forms are covered by ASME and ASTM specifications. The use of wrought AL-6XN products in the ASME Boiler and Pressure Vessel is covered by Code Case 1997 (latest revision) for Section VIII construction and by Code Case N-438 (latest revision) for Section III construction. The use of AL-6XN castings is covered by Code Case 2106 (latest revision) for Section VIII and Code Case 497 (latest revision) for Section III construction. The alloy is approved for both welded and unwelded construction under ANSI/ASME B31.1 Code Case 155. Use of AL-6XN alloy in contact with hydrogen sulfide-containing petroleum and natural gas is covered by NACE MR0175-92.

  

Company Show

Equipment Show

Certificates Show

Project Show