Contact Platform Support
Help CenterAnti-corrosion Coating Liquid(unheated)
Related Products
-
Water-proof Finishing Agent (manufacturer/Supplier)NegotiableMOQ: 20 Kilograms -
Water Repellent & Oil Repellent Textile AuxiliaryNegotiableMOQ: 20 Kilograms
-
Textile Nano Silver Antimicrobial Finishing AgentNegotiableMOQ: 20 Kilograms
-
Heat Insulation Thermcouring High Hardness Glass CoatingUS$ 81.9 - 129MOQ: 20 Liters
-
Sponge Method Allowed Water Based Heat Insulation Glass CoatingNegotiableMOQ: 1 Kilogram
Specifications
Cold treatmentDo not need to heat
Waterproof
prevent oil
Antifouling
[The product description]
ZF - M8 from dry type waterproof, prevent oil, antifouling coating liquid is different from in the market can see ordinary three fluid and waterproofing agent, in room temperature can get effective use, and ordinary anti-corrosion liquid or waterproofing agent use must be above 150 degree in heating drying conditions to the effect, therefore the ZF - M8 products can be widely used in all kinds of leather, chemical fiber, blending, pure cotton cement, wood, marble, all kinds of coating and other surface waterproof, prevent oil, anti-fouling processing, use rise work fast, very convenient. Especially used in all kinds of leather shoes, leather goods, carpet, car mat, carport, outdoor tent cloth, cement, wood, etc, these surface spraying after five minutes, effective from water contact Angle of 140 degrees, a spraying years effective.
[ The product features]
Main ingredients: organic fluorine compounds. Appearance: colorless transparent liquid. Dry time table: less than 5 minutes. Adhesion: leather, cotton, chemical fiber, cement, wood, metal, glass, all kinds of coating surface good adhesion. The main solvent: ethyl acetate. Specific gravity: 0.91
[The application]
Leather, leather, carpet, car mat, outdoor tent cloth, cement, wood and other surface. Method of use: 1, the spray gun or watering can bottle directly spray to the surface of the need to deal with, until coating surface completely after drying can work. 2, the dip coating, spray coating, brush coating process, until the surface completely after drying can work. Note: For the coating of the main solvent is volatile liquid, it is suggested that when used for protective, ensure the environment well ventilated.
The product should be kept note: to avoid direct sunlight exposure in the environment, save in the shade.
Send Inquiry to This Supplier
You May Also Like
-
Industrial-grade Zinc Stearate Powder Release Agent for Plastic Injection MoldingUS$ 2 - 5MOQ: 1000 Kilograms
-
Aramid Air Slide Fabric, Nomex Air Slide Membrane, Kevlar Air Slide Belt, High Temprature Air Slide ClothUS$ 100 - 200MOQ: 1 Meter
-
Sodium Gluconate Cas 527-07-1 25kgUS$ 100 - 2000MOQ: 1 Ton
-
Chemical AuxiliariesNegotiableMOQ: 2400 Kilograms
-
Zeolite Carbon Sieves 3a 4a 13x Adsorbent for Oxygen Concentrator Generator Molecular SieveNegotiableMOQ: 1
-
Modified Starch for Paper IndustrialUS$ 630 - 650MOQ: 5 Tons
-
NA Cmc Powder Food GradeUS$ 550 - 3,690MOQ: 5 Tons
-
Diapers Baler Hydraulic Pressing Baling MachineUS$ 3,200 - 3,250MOQ: 1 Set
-
Leather Wall Panel for Background and Ceiling PanelUS$ 3 - 6MOQ: 200 Pieces
-
AC Blowing Foam Blowing Agents of AzodicarbonamideUS$ 2,100 - 2,680MOQ: 1 Ton
