Amusement Rides Led Pixel Light Dc24v 60MM RGB Flatcap

amusement rides led pixel light dc24v 60MM RGB Flatcap

2. Color and effect: addressable lights you can set to any color, or animate, like running water,chasing

     and scanning etc. depending on the different installation methods may compose different dynamic

     effect of different color's character and design

3. Combination: PVC shell(thermostability, cold-resistant, resistant to UV) and PCB board, connector cables...

4. Waterproof: Yes IP66, with silicon glue waterproof protection.

5. Installation: Easy to install, you'd better drill the hole about 19 - 40mm.

6. With features of high brightness, low power dissipation, long lifespan, low Voltage, low decline, colorful.

7. Power supply: You must use a 24V DC power supply to power this pixel, do not use higher than 25V

     or you can destroy the entire pixel.

8. Connetors: 3PIN JST female and male connectors, also can be waterproof connectors, DAT, DC24V+, GND-. each led pixel is seperate, you can connect them one by one via male and female connectors easliy.

9. Factory sales directly, good quality and price, offer 2 years warranty and quikly after-sale service.

10. Brand: iPixel LED

you can see the front part is 60mm diameter, and the back part will smaller, you can drill the hole with 19mm-40mm when install. and maybe you also noticed there have a plastic screw and a flex plastic ring,

they are for more tighter and fixed well.

Yea, this pixel also can be waterproof connectors version. you can use it outside directly.

Application:

We also have other similar types:

1. 45mm led pixels, 6LEDs/pcs and 9LEDs/pcs, dc24v,  transparent cover

2. 35mm led pixels, 6LEDs/pcs and 9LEDs/pcs, transparent/frost cover

3. 26mm led pixels, 3LEDs/pcs, dc12v, frost / transparent cover