Ceiling Installation Microwave Motion Sensor for Lighting360 Degree Microwave Sensor SwitchDoppler Radar Microwave Motion Sensor

Specifications

Could be used in Incandescent lamp (bulb),energy saving lamp, LED light,electronic fluorescent lamp, exhaust fan and etc.

This microwave PIR motion intelligent switch, which operating frequency is up to 5.8GHZ. It is used the Doppler principle, adopted microwave and microprocessor technology designed to a newborn intelligent product. It could detect the active objects accurately, when the object to be tested enters the detection range, this switch could judge automatically that whether the object fits the needed or not and then begin to work. So that to achieve to the intelligent control for the target load.

 

Feature:

1) Compact Size, could be embedded installation into the ceiling lamp

2) With light-dependent control function;

3) Could set the light-dependent control as the external reality;

4) The sensitivity and delay time is adjustable;

5) Could set different distance;

6) Delay time of lighting could be set as the application environment;

 

Specification:

 

1) Operate voltage: 230V/AC±10%;

2) Power supply frequency: 50Hz;

3) Load power: 500W (Max.,using the incandescent lamp); 200W (Max., using the fluorescent lamp );

4) Operate temperate range: -20°C~ +60°C

5) Limited temperate range: -35°C~ +75°C;

6) Microwave frequency: ISM 5.8GHz;

7)  Installation height: 2m ~ 3.5m (2.5m Suggested ) ;

8) Detection range: 1m ~ 12m (adjustable);

9) Detection delay time: 8sec ~ 12min (adjustable, also could be customized);

10) Indoor installation:  ceiling installation;
12) Detection degree: 360 degree ;

13) Microwave output power: less than 10mw;