XM2012 H I BOX beam end face milling machine

Specifications

XM2012 H I BOX beam end face milling machine
Max width:1200mm-2000mm
Max height:1500mm

1.XM2012 H I BOX beam end face  milling machine

Max milling width	1200 mm	Max milling height	1500 mm
Main slipway enter speed	60~2000mm(frequency conversion and variable speed adopt reducer motor)
Milling head motor power	7.5kw	Milling head main shaft turning speed (six level manual shift)		75-420 r/min
Milling head max cutter diameter	φ250 mm	Milling head main shaft end outer diameter		φ128.57 mm
Milling head main shaft end number	ISO 50	Milling head main shaft internal taper		7:24
Milling head main shaft troke	120 mm	Enter motor power		3 kW
Milling head lift motor power	2.2 kW	Clamp table hydraulic station		11 kW
Milling head lift speed	Stepless speed

 

2. Purpose of  XM2012 H I BOX beam end face  milling machine

 

Because of the high speed development of the society, the engineering quality level for the steel structure required by people is higher and higher, then the jointing face to face of H beam, Box-beam and long thin parts, thus the end-face milling become a very important machining procedure.

 

The milling of work-piece end-face will increase greatly the production efficiency, then to increase the work-piece quality to reduce the errors at working site, therefore will bring greater benefit to the steel structure companies. Our company launches this new equipment into market according to the situation of the steel structure processing and absorbing the advantages of the others, to meet the market requirements. It can be widely applied not only to steel structure, but also to machinery manufacture of electricity, petrol and oil, bridge, chemical as all-purpose machine

 

3.Machine seat and support column process of  XM2012 H I BOX beam end face  milling machine

Steel box column processed on CNC machining center, to make sure good fitting and high strength

 

 

 

 

 

There are two moving quality inspectors at each process, and the manager for each shift and monitor the production closely. Inspect and correct the parts after machining before assembling.

 

 

5.Factory and Workshop show for  XM2012 H I BOX beam end face  milling machine

 

 6. Package and shipment for  XM2012 H I BOX beam end face  milling machine  

 

 

 

7. Warranty and Service after sales for  XM2012 H I BOX beam end face  milling machine

 

Warranty time: 12months since machinery installation finished.

 

Service after sales:

 

Professional Installation and training at customer spot factory,during time decides by different machine.

 

Lower price of consumable parts than markets .

 

Trouble response: 24hours online reply. If broken parts is not comsumable parts or breaks by wrong operation, we can send the broken parts free once confirmed.

 

Engineer service available overseas.