70W 1560mm 2ft CE ROHS led vaporproof lights for Production workshop

Specifications

led vaporproof lights for Production workshop
AC:100-240V, 277V 50/60Hz
95lm/w Ra>80 5yrs Warranty
UL, DLC, GS,CE, EMC,

 

 

Model: LMF-70W

 

 led vaporproof lights for Production workshop

 

   1.Model Name:LED triproof lamp

 

   2.Model No:LMF-70W

 

 

   1.Housing Material:PC

 

   2.Diffuser Material:PC

 

   3.Product Size (mm):1560 *120*108

 

 

 

 

 

1.Input Voltage:AC100-240V,277V

2.Input Frequency:50/60Hz

3.Power Factor:≥0.95

4.Input Power:70W

5.Lamp Efficiency:90%

6.LED:5630

7.LED Quantity:160PCS

8.LED Lumen:Clear Diffuser:5600LM / Opal Diffuser:5500LM

9.Color Temperature: Warm White:2700-3000K   Cool White:4000-4500K   Daylight:6000-6500K

10.Ra:Ra>80

11.Working Temperature:Working Environment: -35°C-45°C

12.IP Rated:IP65

13.Lifetime:>50000h

 

 

1).Luminous Intensity Distribution Diagram:

 

 

 2).AAI Figure:

 

 

3).Illumination data:  

 

Lamp height	Central Lumen (Lux) (Opal diffuser)	Average Lux (Opal diffuser)	Area (cm)
1m	1880	644	260
2m	470	161	512
3m	209	72	782
4m	117	40	1043
5m	75	26	1300

 

 

 

NW	3.6KG
PE bag	1630*170mm
Manual instruction	A4 Paper
Styrofoam A	130*100*37.5
Styrofoam B	130*100*77
Inner box	1600*138*108
Outside Carton	1620*290*230

 

 

 

 

LED triproof lamp is an efficeint outdoor lamp,with high output lumen. It is widely used in Car Parking Lot, Warehouse, Train station and other Publich areas.

 

Advantages:

 

1).The first advantage of this lamp is its heat dissipation system, which increase lamp’s lifetime largely. In detail, it uses heat sink and MCPCB to dissipate the heat caused by LED chips and using Air convection to cool the working environment of driver.

 

2).Using Air convection theory: The driver of this lamp is isolated in a separate room, we call it ventilated driver room, with a small board coving the top. On the board, there are many small holes, and in the bottom of the room, has four small holes.

 

Ventilated driver room: warm air goes out through driver cover holes and cool air supplies from bottom holes.

 

 

3).Moreover, this lamp has function of sensor, emergency kit and DALI system.

 

If customers want the lamp light on automatically when people pass and turn off or only keep 20% light when people leaves, it could put sensor into the lamp. Or if other customers want the lamp still light on for 2 to 3 hours when the power cut, it could put

 

emergency kit inside the lamp. Even, we could apply DALI system with this lamp, using computer to control all lamps in one area, it is really easy and efficient, saving lots of work for people.

 

 

4).The bright spot of the lamp is the fast connect system, by using male and female connectors, it could save 70% time to install lamps and save lots of labor cost nnect wires to the removable male connector, and push it into the lamp, connect with female connector.

 

 

 

5). It has all certifacates that authorized by DEKRA test lab, including CE-LVD, EMC, ROHS, GS, SAA, C-TICK, UL, CUL, DLC.

 

 

 

Clear   Lens	Total Power	lumen	Ra	Product Size(mm)
LMF12-600	12W	970	Ra >80	600*120*108
LMF24-600	24W	2290	Ra >80	600*120*108
LMF24-1160	24W	2360	Ra >80	1160*120*108
LMF36-1160	36W	3540	Ra >80	1160*120*108
LMF48-1160	48W	4540	Ra >80	1160*120*108
LMF34-1560	34W	3030	Ra >80	1560*120*108
LMF54-1560	54W	5150	Ra >80	1560*120*108
LMF70-1560	70W	5600	Ra >80	1560*120*108
WP-76W	76W	5700lm	Ra >80	1860*110*86