db9 serial com port convert usb

Specifications

db9 serial com port convert usb
UK FTDI chip
Industrial grade
Electromagnetic interference ring
For PLC

db9 serial com port convert usb details:

 

As the PC industry continues to evolve, USB interface is gradually replacing the old PC for low-speed peripheral interface, but the current environment, many important devices still use RS-232 interface design, so that many users use USB to RS-232 converter device to PC and RS-232 data transmission between devices.

HU-01 is a universal USB/RS-232 converter, no external power supply, compatible with USB, RS-232 standard, the ability to convert single-ended USB signals to RS-232 signal converter with zero delay automatic transceiver conversion, unique I / O circuit automatically controls the direction of data flow, plug and play. ensure that it meets all existing communications software and interface hardware.

HU-01 interface converter for point to point, the data communication speed 300-460800bps, with a power indicator light and data traffic indicator light to indicate a fault condition, supports communication with a USB to RS-232 converter.

 

Main function

HU-01 USB converter supports the following communication:

1. point to point communication

 

Hardware installation and application

Installing HU-01 USB converter before carefully read the product manual, product communications cable into the computer USB port USB interface port, this product USB/DB9M, universal connector for the input / output interface, RS-without setting automatically 232 communication mode, you can use twisted pair or shielded cable, connectivity, removal is very convenient. Converter for 9-wire, DCD RXD TXD DTR GND DSR RTS CTS RI full signal connection  

 

Performance parameters

1, Standard: USBV1.1, 1.0,2.0 standard EIA RS-232 standard

2, USB signals: VCC, DATA-, DATA +, GND, FG

3, RS-232 signals: DCD RXD TXD DTR GND DSR RTS CTS RI

4, Working mode: asynchronous, point work

5, Baud rate : 300-460800bps, automatically detect the serial signal rate

6, Load capacity: support for point to point communication

7, The transmission distance: RS-232 terminal 5 m, USB port not more than 5 m

8, The interface protection: Surge protection, ± 15KV ESD protection

9, Interface Type: USB Male end A class interface, DB9 male connector head

10, the signal indication: two signal lights transmit (TXD) Receive (RXD) 1 x power LED (POWER)

11, The transmission media: twisted pair or shielded cable

13, Dimensions: 1500mmX36mmX16mm (length X width X height)

14, Use of the environment: -40 °C to 80 °C,

relative humidity 5% to 95%

15,Support:Windows95/98/2000/2003/XP/Vista/WIN7/8/CE/Linux

 

Connectors and signal

1,RS-232C pin assignment

2,USB-A type: USB signal input and Pin Assignment

 

Faults and troubleshooting

1) Data communication fails

A, check the USB interface cable is correctly

B, check the wiring is correct RS232 output interface

C, check the power supply is normal

D, check the wiring terminals are well connected

E, view check whether the receiving indicator will blink when receiving

F, view to check whether the transmission indicator flashes when sending

2) Data loss or errors

A, check the data across the data rate communications equipment, the format is consistent 

Warranty

1.Products can replace within one month after sale;

2.One year warranty after sale;

3.The malfunction and damaged caused by the other barriers (man-made factors or external device) are not warranted.