Wireless vehicle detector traffic magnetic sensor for vehicle detector counting system

Wireless vehicle detector traffic magnetic sensor for vehicle detector counting system

ROSIM ITS devoted to develop the intelligent traffic system, such as smart traffic light control system, This system is include traffic light, traffic light controller and wireless magnetic vehicle detector. The smart traffic light control system supply the dynamic traffic light controlling by the real-time traffic data, it also call adaptive traffic light control system, it adjust the red light for the intersection, reduce the waiting time for the busy traffic and save the power consumption of the cars, reduce the Co2 output.

Adaptive traffic signal control system

Traffic flow detection system

  Corridor management

Traffic signal controlling and red light enforcement

433MHz 120m transmit range
-40~85℃ work temperature
USB/RS-232/Ethernet data port
GPRS communication (Optional)
DC9-36V/PoE power supply
48 detection channels
48 OCs output terminals
48 detection result LEDs
L23/W10/H4.9cm

The most important thing is there is almost no damage to the road when install the sensors. 

 ROSIM is focus on the high technology and wireless communication devices, it have a experienced engineer team and research person which specially on the wireless zigbee network and magnetic detecting harware. Their products are have been done for many outdoor parking lot and street parking guidance system, parking system. All these products have high accuracy and perfect performance. If you looking for parking space detector, smart parking system or parking guidance system, plz contact with ROSIM, it will provide you a cost-effective soluiton for your parking projects.

CE certification

One year's gurantee period

24Hours on line technical supports

Oversea engineer training 

a) Install fast. It is only almost 6 minutes that is needed to install one wireless vehicle detector in the road, after installation, the traffic control could be released immediately;

b) Work all-weather. Bad weather for example heavy fog, snow and rain makes no difference;

c) No damage to the road. There’s no need to cut slots on the road surface and place cables or wires as the installation of loops, but only a tiny hole with the size Φ 120/H 100 mm, which makes WVDs become the most suitable vehicle detecting solution on the city high-way and bridges;

d) About 10 years long life span. With high standard water proof and anti-press characteristics, WVD wireless vehicle detector can even be used in the damaged or distorted roads where loops cannot be installed.

e) Cost saving. You just can use the cement which is about $2 for 3-4 sensors.

f) Easy to maintain. Unlike the loops that are easily to be damaged but difficultly to be repaired, WVD wireless vehicle detector supports firmware updating over the air. No need to re-cut the slots, no more materials needed, and all of what you need is to take almost 10 minutes for the devices wireless updating;

g) Low operation consuming. Due to the ultra-low power design and battery supply solution, WVD wireless vehicle detector’s consumed power is very lower than any other detectors like loops, video, micro-wave etc. in the market. This appears more and more significantly to our environments;

h) Replace loops seamlessly. The same installation position and compatible output signals makes it easily and simply to replace loops in your system directly.

Rosim ITS provides our customers high quality wireless vehicle detector , car counting system and detecting products and solutions, all the products support wireless updating, which makes it easily to maintain.

We supply one year quality gurantee time and 24hours on line service.