replace M6 plate alfa

Specifications

stainless steel plate alfa
1 small heat resistance loss
2 high heat transfer efficiency
3 flexible operation
4 can be OEM

 

replace M6 plate  alfa

series:

Safety heat exchangers

Stainless steel design for food and FDA applications

Compact double PHE-units including cocks and valves

 

Technical data of S6M/B-20

 

Parameters			S6M-20
Heat transfer area of platem2			0.2
Chevron depth mm			3
Chevron angle  º	1		60
	2		120
Chevron normal pitch mm			10.73
equivalent diameter mm			6
Hole diameter mm			58
Center Distance of holes mm	H		903
	W		140
Center distance of suspension mm			960
Cross section of single passage  mm2			624
Overall dimension of plate mm	L		998
	W		248
The max. heat transfer coefficient (water to water)W/ m2.ºC				7500
The max. Working temp.ºC				180
The max. Testing pressure Mpa				2.5
The max. Flow rate M³/h				50

No.	ASSY Area  m2	No.of plate	The max. Flow rate  M³/h	Dimension mm			Theoretical weight Kg
				L	W	H
1	15	75	50	400	340	1146	260
2	20	100	50	600	340	1146	290
3	25	125	50	800	340	1146	320
4	30	150	50	1000	340	1146	350
5	35	175	50	1100	340	1146	380
6	40	200	50	1200	340	1146	410

 

We are a leading specialist in the area of the development and manufacturing of heat exchangers at world-wide standards.

The heat exchangers with up to 1500 m2 exchange surface are supplied for all usual industrial applications as well as for the ranges heating, climate, ventilation, food production, pharmaceutical.

Looking back on many years of broad experience in the field of heat exchanger in all aspects concerned with the design and calculation.

Consistent development in the field of sealed plated heat exchangers has resulted in a wide variety of plate version with respect to surface structure, material and gaskets for various media on heat exchange.

The high performance plates provide the optimum heat exchanger for every thermal problem.

High head transfer coefficients and thus best possible utilization of the surface guarantee a compact, low cost solution to the problem.

Plate heat exchanger offer additional flexibility by changing the number of plates, the heat exchanger can also be adapted to other thermal operating conditions.

Computer programs determine the optimum heat exchanger for your operation conditions based on latest technology.

We provide domestic and foreign customers with wild range of plate heat exchanger in high quality and competitive low price.

 

 

Each plate is provided with a gasket, which seals the flow gaps to atmosphere and the media from one another. The plate package is mounted in a rack consisting of a fixed number of plates. Two pressure plates clamp this package together with tie rods. Single pass and multi-pass arrangements are standard with a surface area of up 1500m2 in one unit. Pure counter flow is employed to achieve maximum possible heat transfer.

 

1.Plate material

Stainless steel suitable for clean water, river water, edible oil, and mineral oil

Titanium and titanium palladium suitable for sea water, salt water, salt.

Hastelloy suitable for sulfuric acid, hydrochloric acid, phosphoric acid

 

2.Design and Selection

The plate heat exchanger produced by our company strictly follows the rule listed in GB16409-1996 "plate heat exchanger," to design, manufacture and test.

3. Overview

Plate heat exchanger is compact and efficient heat exchange equipment, using the metal corrugated sheet as the major heat transfer agent. The fluid flows through the inner-flow mesh panel which is made up by the corrugated plates. Because after the plates assembly, they form a special channel which can generate turbulence under low Reynolds number, and the turbulence can easily destroy the fluid boundary layer,that greatly reduces thermal resistance and efficiently enhances the heat transfer, moreover, with no scale.