Rubber Refining Machine/Machinery

Specifications

Rubber Refining Machine
1 rubber calendaring and pressing
2 roller made of alloy cast iron
3 overload protection device

  Rubber Refining Machine/Machinery  

 

nstruction

This machine consists of Base,Rack,Gland,Rollers,Bearing,Transmission device,Lubrication device,Decelerator,Adjustment device of the roller temperature,Emergency shutdown device and brake rigging and etc.

 

2.uses

 

 It is mainly used for plasticating and mixing of rubber or plasticsect., warming and sheeting rubber compound, cracking and refining ofreclaimed rubber.

 

3.Features

 

 1. Chilled alloy cast iron roll is abrasion resistant with long service life.

 

 2. There are two kinds of Nip adjustment mode for option:manual or electric.

 
3. There are three kinds of Main bearings for option:Bearing or Copper bush or Nylon bush.

  
4. Machine will be tripped off if overloaded to protect valuable electrical circuit.

 
5. All electrical connections are well,short circuits is impossible by any means. 

 

6. There are many speeds and speed ratios available, which can satisfy most customers’ formula and processing requirements.

  

 Version and its Technique Parameters:

  

 

Technique Parameters	XK-160	XK-250	XK-400A	XK-450A	Xk-450	XK-560A	XK-550B	XK-660	XKY-660
Roll diameter(mm)	160	250	400	450	450	560/510	550	660	660
Roll length(mm)	320	620	1000	1200	1200	1530	1500	2130	2130
Front roll surface speed(m/min)	8.95	15.3	18.65	18.65	23.47	27.87	28.32	28.6	32.53
Friction ratio	1:1.35	1:1.1	1:1.27	1:1.27	1:1.27	1:1.2	1:1.22	1:1.24	1:1.09
Max.nip	4.5	8	10	15	15	15	15	15	15
Feeding capacity per	1-2	10-15	18-35	25-50	25-50	35-50	50-60	165	165
Power	5.5	18.5	37	55	55	90	110	160/245	160/245
Size(lenght*width*height)(mm)	1226*830*1295	3400*1600*1500	4350*1850*1780	5200*2380*1940	5670*2390*1670	6180*2280*1970	5870*2470*2040	7460*3660*2080	7465*3660*2080
Weight(Kg)	1280	3300	7860	12600	11940	22500	27000	49940	49000

 

Based on the ideas of High quality and Credit, we strictly control the quality of the

 

products, and constantly improve our powerful technical support and personnel

 

training to per customers. Mutual benefit is our aim and customers' satisfaction is our

 

success.

 

Picture one : XK-160 lab rubber mixing mill . Mainly used for lab use

 

 

 

 

 

picture two : XK-250 rubber mixing mill . production capacity is about 150 kg/h

 

 

picture three : xk-360 rubber mixing mill .Production is about 250 kg/h

 

 

 

picture four : xk-400 rubber mixing duction is about 350 kg/h . From this model , we begin distiguish configuration . NYLON , COPPER , ROLLER BALL BEARING.

 

 

 

picture five:XK-450 rubber mixing mill . two configuration , stock blender is choosed . 500 kg/h

 

 

 

picture six : XK-560 . two configuration , stock blender . production is 500 KG/H

 

picture eight : XK-660 rubber mixing mill . production capacity 2000 kg/h

 

Brief Introduction of our factory:

Qingdao Yahua Machinery Co.,Ltd is situated west of Jiaozhou and east of Qingdao Economic Developing Zone, near No.,204 National Road and Tongsan High Way.

We are very professional rubber machinery factories here. OUr products are well-known from different areas in domestic and overseas.

Our slogan is: Quality makes survive. Technology makes develop. Good service deserves good reputation. Good results deserves good organization. We are keeping on working hard and develop better products.  Looking forward our long friendly cooperation with people from all of the world.

 

Contact Person: Bella

 

Office Phone:  0532-83132191/85165781

 

 Fax Phone:  0532-83137817/85165781

 

Mobile phone:13325017346