ddr3

Silkway Product Description                                                                      

DDR3 RAM module 

DDR3 8GB 1600MHZ SODIMM, NOTEBOOK MEMORY

NOTEBOOK MEMORY

These low-density DDR3 modules feature a 1600MHz operating speed for multitasking, web browsing and gaming. They are fully downward compatible with 1333MHz and run at 1.5V for maximum compatibility. 

<![if !supportLists]>·     <![endif]>VDD = VDDQ = 1.5V ±0.075V

<![if !supportLists]>·     <![endif]>1.5V center-terminated push/pull I/O

<![if !supportLists]>·     <![endif]>Differential bidirectional data strobe

<![if !supportLists]>·     <![endif]>8n-bit prefetch architecture

<![if !supportLists]>·     <![endif]>Differential clock inputs (CK, CK#)

<![if !supportLists]>·     <![endif]>8 internal banks

<![if !supportLists]>·     <![endif]>Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals

<![if !supportLists]>·     <![endif]>Programmable CAS READ latency (CL)

<![if !supportLists]>·     <![endif]>Posted CAS additive latency (AL)

<![if !supportLists]>·     <![endif]>Programmable CAS WRITE latency (CWL) based on tCK

<![if !supportLists]>·     <![endif]>Fixed burst length (BL) of 8 and burst chop (BC) of 4 (via the mode register set [MRS])

<![if !supportLists]>·     <![endif]>Programmable CAS latency  9, 10 ,11 supported

<![if !supportLists]>·     <![endif]>Programmable additive latency 0, CL-1, and CL-2 supported

<![if !supportLists]>·     <![endif]>Programmable CAS Write latency (CWL) = 9, 10, 11

<![if !supportLists]>·     <![endif]>Selectable BC4 or BL8 on-the-fly (OTF)

<![if !supportLists]>·     <![endif]>Self refresh mode

<![if !supportLists]>·     <![endif]>Average Refresh Cycle (Tcase of 0 °C to 95 °C)

                 - 64ms, 8192 cycle refresh at 0°C to 85°C
                 - 32ms, 8192 cycle refresh at 85°C to 95°C

<![if !supportLists]>·     <![endif]>Self refresh temperature (SRT)

<![if !supportLists]>·     <![endif]>Write leveling

<![if !supportLists]>·     <![endif]>Multipurpose register

<![if !supportLists]>·     <![endif]>Output driver calibration

<![if !supportLists]>·     <![endif]>JEDEC standard 78ball FBGA(x4/x8)

<![if !supportLists]>·     <![endif]>RoHS compliant