SONY module at 3x optical 12x digital zoom hd-sdi ptz camera

Specifications

1. 4inch mini hd-sdi ptz camera
2. 1/2.8 Sony Exmor CMOS sensor
3. 2 megapixels ,0.03 lux
4. 3x optical ,12x digital

 

 SONY module at 3x optical 12x digital  zoom hd-sdi ptz camera

 

 

1. 4inch mini hd-sdi ptz camera

2. 1/2.8 Sony Exmor CMOS sensor

3.  2 megapixels ,0.03 lux
4.  3x optical ,12x digital
5.  3-9mm lens ,WDR control,Built-in decorder,Auto Flip,Pan:0.4-320 degrees/seconcd            Tilt:0.4-150 degrees/second,7/2 alarm input/output,128 presets,Wall,Pendant,Corner,Pole 

5.  IP66,lightning proof surge proof
6.  Packing size:32x32x21(mini ptz)
                      

 

 

 

 

 

  HD SDI PTZ Camera Specification    hd-sdi ptz camera

 

 

Model	HD-2000MS-SDI
Camera
Image Sensor	1/2.8 Sony Exmor CMOS sensor
Effective Pixels	1944(H) x 1092(V), 2 Megapixels
Scanning System	Progressive
Electronic Shutter Speed	1/1 ~ 1/10,000s	1/1 ~ 1/30,000s
Min. Illumination	Color: 0.5 lux/F1.6 B/W: 0.095 lux/F1.6	Color: 0.05Lux/F1.6 B/W: 0.005Lux/F1.6
S/N Ratio	More than 50dB
Video Output	BNC(1.0Vp-p/75Ω), PAL / NTSC
Resolution	1080p(25/30fps), 720p(25/30/50/60fps)	1080p(25/30fps),  720p(25/30fps)
HD-SDI Video Output	1ch HD-SDI high -definition video (SMPTE 292M standard)
Camera Features
Day/Night	Auto(ICR) / Color / B/W
Backlight Compensation	BLC / HLC / WDR	BLC / HLC / DWDR (Digital WDR)
White Balance	Auto, ATW, Indoor, Outdoor, Manual
Gain Control	Auto / Manual
Noise Reduction	2D / 3D
Privacy Masking	Up to 24 areas
Digital Zoom	3X
Lens
Focal Length	3mm ~ 9mm(3x Optical zoom)
Max Aperture	F1.6 ~ F3.5
Focus Control	Auto / Manual
Angle of View	H: 58.2° ~ 2.9°	H: 55.4°~ 2.9°
PTZ
Pan/Tilt Range	Pan: 0° ~ 360° endless; Tilt: -2° ~ 90°, auto flip 180°
Manual Control Speed	Pan: 0.1° ~ 300°/s; Tilt: 0.1° ~250°/s
Preset Speed	Pan: 400°/s; Tilt: 300°/s
Preset	255(Pelco-P/D)
PTZ Mode	5 Pattern, 8 Tour, Auto Pan, Auto Scan
Speed Setup	Human-oriented focal length/ speed adaptation
Power up Action	Auto restore to previous PTZ and lens status after power failure
Idle Motion	Activate Preset/Pan/Scan/Tour/Pattern if there is no command in the specified period
Time Task	Auto activation of Preset/Pan/Scan/Tour/Pattern by preset-time
Protocol	Pelco-P/D (Auto recognition)
Auxiliary Interface
RS485	1 port
Alarm	7/2 channel In/Out
General
Power Supply	AC 24V/3A (±10%)
Power Consumption	12W, 25W(Heater on)
Working Environment	-40ºC ~ 60ºC / Less than 90% RH
Protection Level	IP67, IK10 optional
Dimensions	4 INCH
Weight	2.0kg