Automatic Car Parking System

Specifications

1. Realize multi levels parking
2. Automatic Car Parking System in basement, ground, or ground with pit.
3. PLC control
4.CE

 

Automatic Car Parking System

 

 

 

This equipment is two level and multi-column design, there's an empty parking space that can slide right or left on ground level.

Cars parked/unparked by the lifting of car pallet on second level and the sliding of car pallet on ground level. Parking space on ground level can park/unpark car directly. When parking/unparking car on second level, the car pallet on ground level will slide right or left, leave an empty space for shift, so the car on second level can reach the ground level, the car can be parked or unparked.

The park/unpark process can be seen in below diagrams.

 

 

Diagram 1:

The car in red color on second level is to be unparked. The equipment need to finish follow actions to unpark the car.

1. The car pallet on ground level that underneath the red car slide one space to the right.

2. The second level car pallet shift down to the ground.

3. The red car finish unparked.

 

 

Diagram 2:

The car in red color on second level is to be unparked. The equipment need to finish follow actions to unpark the car.

1. Two pallets on ground level both slide to right one space.

2. The second level car pallet shift down to the ground.

3. The red car finish unparked.

 

Diagram 3:

This is a shuttle tyre park/unpark diagram.

The red car on left side of back row on second level is to be unparked. The equipment need to finish follow actions to unpark the car.

1. The pallets of back and front row on ground level both slide to right one space.

2. The left side pallet of back row on second level which loading the red car shift down to ground.

3. The red car finish unparked by crossing two pallets on ground.

Features:

1. Realize multi levels parking, increasing parking places on limited ground area.

2. Can be install in basement, ground, or ground with pit.

3. Gear motor and gear chains drive for 2&3 level systems and steel ropes for 4,5&6 level systems, low cost, low maintenance and high reliability.

4. Safety anti-falling hook is installed to prevent accident and failure, be sure whole system safety .

5. Smart operation panel, LCD display screen, button and card reader control system.

6. PLC control, easy operation, push button with card reader.

7. Photoelectric checking system which detect vehicle size

8. Steel construction with complete zinced after shot-blaster surface treatment, anti-corrosion time is more than 35 years

9. Emergency stop pushbutton, and interlock control system.

 

Specifications:

 

Suitale Parking Cars	Model	Small Car	Mid-Size Car	Large Car	Over Size Car
	Car Size	Length*Width*Height	Length*Width*Height	Length*Width*Height	Length*Width*Height
	(MM)	≤4400×1750×1450	≤4700×1800×1450	≤5000×1850×1550	≤5300×1900×1550
	Car Weight	≤1300Kg	≤1500Kg	≤1700Kg	≤2350Kg
Requirement Space	A(MM)	4870	5170	5470	5770
	B(MM)	3070	3150	3380	3780
	C(MM)	955	1090	1110	1040
	D(MM)	600	735	755	705
	E(MM)	140	140	140	140
	F(MM)	4600	4900	5200	5500
	N(MM)	2250	2300	2350	2400
	Net Height(MM)	≥3600	≥3600	≥3600	≥3600
Motor Power	Lift Motor	2.2Kw	2.2Kw	2.2Kw	2.2Kw
	Sliding Motor	0.2Kw	0.2Kw	0.2Kw	0.2Kw
Rated Speed	Lift Speed	4.5M/Min	4.5M/Min	4.5M/Min	4.5M/Min
	Sliding Speed	8.9M/Min	8.9M/Min	8.9M/Min	8.9M/Min
Drive Mode		Motor,Chain	Motor,Chain	Motor,Chain	Motor,Chain
Power		3 Phase 5 Wire 380V 50HZ	3 Phase 5 Wire 380V 50HZ	3 Phase 5 Wire 380V 50HZ	3 Phase 5 Wire 380V 50HZ
Control Mode		Button,IC Card and Remote Control System	Button,IC Card and Remote Control System	Button,IC Card and Remote Control System	Button,IC Card and Remote Control System
Surface Treatment		Galvanized/Painting	Galvanized/Painting	Galvanized/Painting	Galvanized/Painting
Column Width(MM)		2250	2300	2350	2400
Inner Width of Pallet(MM)		1900	1950	2000	2050