double-ply plate lifting clamp 1T

1.Application: Horizontal ,I beam steel or shape steel lifting of steel plate .
2.Loading range:0 to7 ton.
3.two piece of clamp are used for the testing, but 2 pieces or 4pieces are recommended for lifitng operation, when 4 pieces working, balance beam is needed ,otherwise ,it will cause automatic unloading.
4.Testing load is 2 times of working load.
5The loaded object shall not touch anything whrn operating,over loading is prohibited.
6.The rated loading is the maximum weight as the angle is 60 degree and a pair of clamps are recommended.
7.The head rolls a design, can avoid a steel rope hurting,getting in touch with area is large,the stability is better.
8.The point presents triangle,be convenient to get into narrow and small space.

Art.No WLL/Pair(t) Steel plate thickness (mm)
QS 1    1                              0-40
QS 2    2                              0-50
QS3.2    3                              0-60
QS 5    5                              0-70
QS 7    7                              0-90