Contact Platform Support
Help CenterDrill Mud Polyacrylamide, Polyacrylamide Powder
Related Products
-
Bentonite Powder for Drilling FluidsUS$ 60 - 150MOQ: 100 Tons -
Bentonite for Drilling Fluids, Bentonite Price,bentonite Clay PriceUS$ 60 - 150MOQ: 100 Tons
-
Drill Mud Polyacrylamide ,polyacrylamide/pam MsdsUS$ 1,400 - 2,500MOQ: 1 Ton
-
DTH Bits Efficient High Pressure Hammer Drill BitUS$ 50 - 1,000MOQ: 1 Piece
-
DTH Hammers Button Bit,button Drill BitUS$ 100 - 1,000MOQ: 1 Piece
Specifications
cationic polyacrylamide
1. Easy to dissolve
2. Good flocculation, wide PH range
3. Free sample
4. Low cost
Product Description
1. Introduction:
This product is water soluble polymers or polyelectrolytes. Because of its molecular chain containing a certain amount of polar groups, it can absorb water through a suspension of solid particles, make the particles or through the charge that bridge and condensed the particles formed floc properties. So, it can accelerate suspension of the particle settlement, have obvious to speed up the solution to clarify, promote filtering and other effects.
2. Product Advantages:
1). Flocculation ability, high adsorption activity, floc formation and deposition of fast
2). Without alkali and other additives, PH broad in scope, ease of use; for low-temperature, low turbidity, low alkalinity of the raw water is also good flocculation3).easily to use and good effective.
3. Specification:
Item Index
Appearance White Granular Powder
Molecular Weight 8-16 Million
Ionic Degree 5-60
PH 2-14
Undissolved Substance (%) 0.2 Max
4. Application method:
1. It is recommended to prepare the product in water solution at 0.1% concentration. It is proposed to use the neutral and desalted water.
2. The product should be scattered evenly in the stirred water, and the dissolving can be accelerated by warming the water (below 60°C).
3. The most economical dosage can be determined based by a preliminary test.
4. The solid product is packed in inner plastic bags and further in polypropylene woven bags with each bag containing 25Kg. The colloidal product is packed in inner plastic bags and further in fiber plate drums with each drum containing 50Kg or 200kg.
5. This product is hyqroscopic, so it is should be sealed and stored in a dry and cool place below 35°C.
6.The solid product should be prevented from leaking on the ground because the hygroscopic powder can make the floor slippery.
Packaging & Shipping
1. Lading of Port: Shanghai
2. Container Volume: 18 tons/FCL with Pallets
3. Payment terms: TT or L/C at sight
4. Usage: Widely applied for treating the domestic sewage, industrial waste water
5. Package: Packed in Single Kraft Paper Bag Laminated with PE Wovenbag 25 Kgs Net Each
6. Storage: The products shall be sealed and stored in the dry and ventilated place to prevent from rain ,high temperature and strong sunlight .
Send Inquiry to This Supplier
You May Also Like
-
High Efficiency Mould Release Agent Silicone Type for Rubber & Composite PartsUS$ 2 - 5MOQ: 1000 Kilograms
-
Cyanuric Acid 25kgNegotiableMOQ: 1 Ton
-
Zeolite Carbon Sieves 3a 4a 13x Adsorbent for Oxygen Concentrator Generator Molecular SieveNegotiableMOQ: 1
-
Modified Starch for Paper IndustrialUS$ 630 - 650MOQ: 5 Tons
-
NA Cmc Powder Food GradeUS$ 550 - 3,690MOQ: 5 Tons
-
Diapers Baler Hydraulic Pressing Baling MachineUS$ 3,200 - 3,250MOQ: 1 Set
-
Leather Wall Panel for Background and Ceiling PanelUS$ 3 - 6MOQ: 200 Pieces
-
AC Blowing Foam Blowing Agents of AzodicarbonamideUS$ 2,100 - 2,680MOQ: 1 Ton
-
High Quality Anionic Polyacrylamide Water Treatment Chemicals Polymer /PAM for Waste Water/Oil Drilling/MiningUS$ 1,000 - 2,600MOQ: 1 Metric Ton
-
10-0132 T/r/l Suiting FabricUS$ 2 - 3MOQ: 3000 Meters
