TCP/IP Network Audio System IP Audio Amplifier For General Classromms
T-6705B
Digital IP Digital Amplifier IP Network adapter For IP Audio System
The T-6705B is a wall mount network audio adapter built-in amplifier for network audio system, its distinctive features is built-in speaker line backup. One line is built-in low impedance speaker line, once this line is failure to receive network source, it will automatically switch into the backup 100V PA system to ensure the local sound system is working continuously without any interference.
It is a best seller model for IP/TCP network audio system solution. It is used to transmit program from internet to its built-in amplifier then to low impedance loudspeakers. So the normal connection way as below: Control port by RJ45 connector to LAN switch and speaker outputs to loudspeakers.
The IP network audio adapter is of wall mount design, it is built-in a 10W digital Class-D amplifier, so it is usually installed in the terminal room together with a pair low impedance speakers for a small sized application.This LAN network technology also allow this IP network audio adapter with amplifier could be installed anywhere of the LAN system, thus the cable wiring cost could be saved.
The biggest advantages of the network audio system are: Super distance audio transmission, simultaneousmaximum program task and non-dedicated network wiring. A 4 ohms loudspeaker could be directly powered by the built-in 10W power amplifier.
Model |
T-6705B |
Network Input |
Standard RJ45x3, 1 Input, 2 Output |
Protocol Support |
TCP/IP, UDP, IGMP (group broadcasting) |
Audio Formats |
MP3/MP2 |
Sampling Rate |
8K~48KHz |
Transmit Speed |
10Mbps |
Audio Format |
16 digit stereo CD tone |
Frequency Output |
20Hz~16KHz |
THD |
≤0.3% |
S/N |
≥70dB |
|
Speaker Output Impedance And Rated Power Output |
4 ohm, 10W Industrial Standard Screw terminals |
Aux Line Voltage Input |
2x400mV Industrial Standard Screw terminals |
Sources Voltage Output |
2x775mV Industrial Standard Screw terminals |
Mandatory Input |
0V Industrial standard screw terminals |
Source Impedance Output |
1 |
MIC Input S/N |
10mV |
Working Temperature |
5 ℃~40℃ |
Working Humidity |
10%~90% |
Power Consumption |
≤40W |
Power Supply |
~110V/60Hz or ~230V/50Hz |
Dimensions |
359x245x65mm |
Weight |
4.20Kg |

- Well-trained sales team for sales and basic technical service.
- New product promotion and seminar for all employees.
- Two English spoken technician provide online after sales service.
- Online system software demo and configuration is available.
- 30 system consultants and 10 designers to make drawing and BOQ for each tender.
- Design and BOQ response to customer within 48 hours.
- PDF specification sheet, system configuration template and architectural & engineer specification for documents support.
- Technical documents could be downloaded from website
Send Inquiry to This Supplier
You May Also Like
-
High Accuracy NTC 10K 3950 Underfloor Heating Temperature Sensor TPE Injection Molded ProbeUS$ 0.7 - 1MOQ: 1000 Pieces
-
Professional Wireless DJ Audio Mixer - 6-Channel BT Compatible DJ ControlNegotiableMOQ: 1
-
2014 High Quality 1U Wholesale Home Power Amplifier E-200US$ 330 - 630MOQ: 1 Piece
-
New Design Monitor Speaker StandUS$ 7 - 8MOQ: 200 Pieces
-
9V3Ah LiFePO4 Battery for LED LampNegotiableMOQ: 100 Packs
-
Roto Mold Plastic Home LightNegotiableMOQ: 100 Sets
-
Power Amplifier 2.0 Channel Professional Power AmplifierUS$ 20 - 50MOQ: 100 Pieces
-
Multimedia Central SystemUS$ 90 - 150MOQ: 5 Sets
-
Dual 10'' Line Array Neodymium Driver HornUS$ 1 - 5,000MOQ: 1 Set
-
1500w Mini Fog Machine /smoke MachineUS$ 1 - 100MOQ: 1 Piece




