Contact Platform Support
Help CenterHigh Quality Single Component Polyurethane Waterproof Coating/waterproof Building Materials
Related Products
-
Jinlong Hot Sale Single Component Polyurethane Waterproof Coating for Swimming PoolUS$ 1.38 - 1.8MOQ: 2 Tons -
New Price!Jinlong Hot Sale Single Component Polyurethane Waterproof Coating for BasementUS$ 1.38 - 1.8MOQ: 2 Square Meters
-
New Price!Jinlong Hot Sale Single Component Polyurethane Waterproof CoatingUS$ 1.38 - 1.8MOQ: 2 Tons
-
a Good Polymer Emulsion Architectural Waterproof CoatingNegotiableMOQ: 1 Metric Ton
-
2016 Cheap Polymer Emulsion Architectural Waterproof CoatingNegotiableMOQ: 1 Metric Ton
Polycondensation received isocyanate terminated pre-polymer
Introduction
JinLong Single component waterproofing coating, easy to apply, the requirement to moisture content of the base is not high, it can be applied on the more moist surface, also available on the surface it’s relative humidity is more big. Polyurethane coating film has high strength and elongation,good elasticity, good high temperature and low temperature resistance, and high adaptability to substrate shrinkage and cracks.Can coat 1mm to 3mm thick one time, coated film is dense ,no bubbles, and high bonding power .
Not necessary to brush the substrate treatment agent on the various substrate which is up to the standard.
Specification
Characteristics
1. No benzene solvents, little smell, no harm to human, animals and plants.
2. Single component, ready to use, no mixing and weighing at site;
3. Easy and quick application, economic;
4. Seamless membrane based upon moisture curing chemistry;
5. The film is generated by chemical reaction, featured with water-resistance, corrosion resistance, and fungus resistance.
6. It is featured with good physical and mechanical properties, high resilience, anti-fatigue, aging resistance. Its tensile strength reaches as high as 3Mpa with elongation at break 600%.
Applications
1. It's applicable to home decoration such as kitchens, toilet, non-exposed roofs, etc.
2. It can be used in internal walls, water tanks, flower bed, swimming pools, fountains,
Jinlongdouble component waterproofing coating belongs to solidify waterproof materials, and the Group A is isocyanate terminated pre-polymer polycondensated by polyether and isocyanate, Group B is colored liquid composed of plasticizer, curing agent, thickening agents, coagulant agent and filler, Mix Group A and B evenly as rate and brush on the waterproofing substrate surface, form a elastisic and rubber-like coating film through cross-linking and solidifying at normal temperature , which plays a role of waterproofing
Jinglong double component waterproofing coating forms seamless, integrate elasticity waterproof layer after solidifying , and improve waterproof and seeping resistance of the project, which is waterproof membrane that can not be attained. Especially the coating film has high elasticity and elongation , high adaptability to substrate cracking or expansion.
NO |
ITEM |
INDEX |
|
1 |
2 |
||
1 |
Sold content /% |
≥92% |
|
2 |
Dry time of outside /h |
≤8h |
|
Dry time of inside /h |
≤24h |
||
3 |
Tensile strength Mpa≥ |
1.9 |
2.45 |
4 |
Fractrre elongation %≥ |
450 |
450 |
5 |
Water impermeability 0.3Mpa,30min |
Impermeability |
|
6 |
Bending at low lemperature °C |
≤-3.5 |
|
7 |
Bonding strength of moisture Mpa≥ |
0.5 |
|
Attention
1. Recommended application temperature 5°C~ 40°C, application in rains is unacceptable.
2. Application under humid and unventilated condition is not recommended. Vents shall be equipped during application in closed conditions.
3. No smoking or open flames in application site.
4. It must be used up in 40 minutes once it is opened;
5. It could carry out the next step after the coated film dries completely.
Packing, Storage and Transportation Conditions
* Packing: 25kg/barrel, 800 barrels/20ft container;
* Storage: The recommended storage temperature is 5°C ~ 40°C;
Stored in dry and ventilate condition and avoid direct sunlight;
* Transportation: Avoid direct sunlight, collisions and fire during transportation;
* Shelf life: The guarantee storage period is 6 months, the coating out of storage time should be used after rechecking.
WEIFANGSHI JINLONG Waterproof Materials Co., Ltd. is a professional and leading waterproofing manufacturer integrating R&D, production, sales and construction.
JINLONG was founded in 2003 and covers an area of more than 100,000 square meters. Headquartered in Shandong, China, the company has 2 production bases in China.
JINLONG produces asphalt shingle, PP&PE/PVC/TPO/EPDM/CPE waterproof membrane, roof underlayment, SBS/APP bitumen waterproof membrane, self adhesive waterproof membrane, waterproof coatings(polyurethane, polyurea etc), pond liner and others.
With a high-tech team of research and development,we have our patent technology, the spray application waterproof membrane.They are the most advanced technology in tunnel and underground projects.
Quality is our life,customer satisfaction is our goal, to build the world be more beautiful is our responsibility!
Send Inquiry to This Supplier
You May Also Like
-
1.5mm Thick UV-resistant Geomembrane High Strength Waterproof Membrane for Dam and Canal Lining BOLIUS$ 0.15 - 0.20MOQ: 10 Square Meters
-
High Adhesive, Water-proof, Anti Corrosion, Weather-resistant Asphalt Adhesive Glue Patch Cover for ConstructionNegotiableMOQ: 100 Rolls
-
Non-curable Rubber Paint Rubber Asphalt Waterproof Coating Made in ChinaUS$ 1.5 - 6MOQ: 500 Kilograms
-
Low Cost Waterproof Material ManufactureUS$ 1,000 - 50,000MOQ: 1 Set
-
PTFE Architectural Membrane MaterialNegotiableMOQ: 1
-
Special Compound BaseUS$ 0.12 - 0.25MOQ: 7000 Square Meters
-
PolyLock/HDPE Lock/ E Lock/ HDPE E Lock/Geomembrane Attaches HDPE GeomembranesUS$ 10 - 50MOQ: 1 Piece
-
Breathable House Wrap Membrane Roofing Waterproofing MembraneUS$ 0.42 - 0.42MOQ: 5000 Square Meters
-
<MIicroVENT> Waterproof Vent MembraneUS$ 0.1 - 3MOQ: 10000 Pieces
-
Self Adhesive Polymer Modified Bitumen Waterproof MembraneNegotiableMOQ: 2000 Square Meters
