2016 Hot Sale HDPE Cross Membrane for 1.2mm 1.5mm 2.0mm
HDPE cross membrane for producing the self adhesiv waterproof membrane
Jing long Waterproof has newly developed the self-adhesive membrane made from cross laminating HDPE film, asphalt and high polymer adhesive. This product is featured by high property performance, cold application, excellent size stability, anti-UV and good tear resistance.
HDPE film used in this product is manufactured through cross-lamination processing, which enables the film elongation stable both in MD and TD, while no deformation is caused. The polymer (chain) and cement polymer (silicate) function together to form cross interface structure and ensure a permanent, continous seal on cement base.
.
2.Product Features:Excellent physical properties
1) a nail rod tear strength, a nail rod water tightness is more excellent than ordinary mask.
2) with strong cross film production of self-adhesive membrane than ordinary waterproof coiled material on the nails roofing fixing piece of bond stress is stronger, and more high tear strength.Because the nails through the strong cross membrane, vertically and horizontally staggered film to nail a wrapped function and the stress is the same, not tear.While the ordinary film is high longitudinal strength, transverse strength is very low.
3) excellent tensile strength and two-way tear resistance, good weatherability
4) good dimensional stability, not wrinkle, waterproof effect is more reliable.
3 Construction performance and friendly
1) roll material and structure are firmly bonded to roll any local failure, the water would be limited in scope is very small, not channeling.Even if the individual leakage, leakage and destruction is also the same point, easy maintenance.Self adhesive layer is very characteristic "self-healing function" can make local self healing by puncture point.
2) the construction of the environment adaptability and better.Wet base construction can be, without bottom coating, solvent, fuel, which can not only guarantee the construction period and the environmental pollution is avoided, friendly to the environment of construction.
3) to adapt to climate change hot and cold regions, also can form a good paste without Konggu in irregular part.
If you have any questions,pls contact me.
Skype:live:18353618267
Whatsapp:+8618353618267
Send Inquiry to This Supplier
You May Also Like
-
High Adhesive, Water-proof, Anti Corrosion, Weather-resistant Self-adhesive Bitumen MembraneNegotiableMOQ: 100 Rolls
-
1.5mm Thick UV-resistant Geomembrane High Strength Waterproof Membrane for Dam and Canal Lining BOLIUS$ 0.15 - 0.20MOQ: 10 Square Meters
-
GeomembraneNegotiableMOQ: 2700 Rolls
-
Non-curable Rubber Paint Rubber Asphalt Waterproof Coating Made in ChinaUS$ 1.5 - 6MOQ: 500 Kilograms
-
Low Cost Waterproof Material ManufactureUS$ 1,000 - 50,000MOQ: 1 Set
-
PTFE Architectural Membrane MaterialNegotiableMOQ: 1
-
Special Compound BaseUS$ 0.12 - 0.25MOQ: 7000 Square Meters
-
PolyLock/HDPE Lock/ E Lock/ HDPE E Lock/Geomembrane Attaches HDPE GeomembranesUS$ 10 - 50MOQ: 1 Piece
-
Breathable House Wrap Membrane Roofing Waterproofing MembraneUS$ 0.42 - 0.42MOQ: 5000 Square Meters
-
<MIicroVENT> Waterproof Vent MembraneUS$ 0.1 - 3MOQ: 10000 Pieces

