Contact Platform Support
Help CenterJINLONG Self-adhesive Bitumen Waterproof Membrane
Related Products
-
New Price!HDPE Self-Adhesive Waterproofing Membrane for 2.0mm/2.5mm/3.0mmUS$ 2.15 - 3.65MOQ: 1000 Square Meters -
HDPE New Price!HDPE Self-Adhesive Waterproofing Membrane for 2.0mm/2.5mm/3.0mmUS$ 2.15 - 3.65MOQ: 1000 Square Meters
-
2016 Hot Sale HDPE Cross Membrane for Producing the Self Adhesiv Waterproof MembraneUS$ 2.5 - 2.5MOQ: 1000 Square Meters
-
2016 Jinlong Cheapand Height Quaality Waterproof MembraneUS$ 2.5 - 2.5MOQ: 1000 Square Meters
-
2016 Jinlong Self Adhesive Bitumen Waterproof MembraneUS$ 2.5 - 2.5MOQ: 1000 Square Meters
Self-adhesive Bitumen Waterproof Membrane
Product Description
Self-adhesive polymer modified bitumen rubber waterproof membrane is made of basic material such as SBS, SBR, water soaking agent, modified bitumen and bonded with polyethylene film and aluminum foil or without film (double-side self adhering) covered with anti-adhesion isolating tape.
Product Features
Self adhesive rubber waterproof membrane has excellent performance on impermeability, high and low temperature flexibility, extensibility and adhesion and it can well adapt deformability caused by tensile stress on the base layer. The membrane is highly resistant to puncture and has excellent self healing property, with the function of self-locking water. It has excellent adhesion bond and is convenient for construction and maintenance.
Main performance index:
Self adhesive rubber waterproof membrane complies with the requirements of JC840-1999.
Application requirements
Seam roof waterproof construction:
- Before application, the substrate must be free of any dust, dirt, oils, moisture or debris that could interfere with proper adhesion. Often the roof surface must be primed prior to membrane application, with the cement adhesive bonding, width of 10 cm. Additional layer juncture and waterproof layer juncture stagger 5 cm above.
- Till dry for 1-2hours , use the waterproof sealant to seal all entrance for water on the roof.
- The basement waterproof juncture construction: the 10-15 cm lap article cover joint way, choose agglutinate article cover polymer adhesive.
- Waterproofing materials lap width long side of 8-10 cm shorter edges 10-15 cm, and the adjacent short side seams shall be more than 10 cm stagger angle metope and ground in for 30 cm above all.
Scopes of application:
For industrial and civil buildings roof, underground and other moisture-proof and the bridge, , swimming pool, water tunnels and other buildings. Also for waterproofing projects of timber structure and metal structure.
Storage and transportation
- Membranes should be stored under dry and ventilated conditions in order to keep away from sunlight and raining. Unprotected self-adhesive products should not be stored in direct sunlight since exposure to ultraviolet (UV) rays ,which may affect the adhesive properties, especially on the outer convolutions of the roll. Extreme storage time and conditions can alter the tack properties of the self adhesive bitumen blend.
- Membrane rolls should be put vertically and should not be stacked exceeding one meter. Self-adhesive membranes are generally packaged and stored in cardboard boxes or are protected with opaque wrapping.
- Keep membranes away from heat source and pay attention to fire.
Packed in plastic bags
7 days after received the deposit
Jinlong company attaches great importance to product quality and after-sales service work, the "quality first , service first " as the company 'scommitment forever .In quality management , foster a sense of strict quality control to ensure the continuous improvement of product quality and improvement . In the service , the company insisted the service as an integral part of the compang's products with a good after-sales guidance and technical support to ensure the company's products can provide you better service.
1.Free samples of waterproof membranes are available for your closer checking.
2.Waterproof engineering analyzing and solution providing.
3.Product application & maintainance technical support.
4.Documents support for destination customs
5.Aftersales problem analyzing and solution providing.
Q: Do you charge for the samples?
According to our company policy, the samples are free, we only charge the freight. And we will return the
freight if you set the order .
Q: Can you produce the product according to customers' requirements ?
Sure, we are professional manufacturer, OEM is welcome.
Q: Can you tell me your main customers?
That's our customers' privacy, so we should protect their information. At the same time, please rest assured
that your information is also safe here.
Q: Are you a factory or a trading company?
Factory.
Q: What about the quality?
We can provide you samples for quality inspection. If you order to us ,we must promise the quality , if some
quality problem happened, we can have a negotiation of the compensation and sign agreements ,and our
after-sales department will perform the duties as the agreements.
Send Inquiry to This Supplier
You May Also Like
-
High Adhesive, Water-proof, Anti Corrosion, Weather-resistant Self-adhesive Bitumen MembraneNegotiableMOQ: 100 Rolls
-
1.5mm Thick UV-resistant Geomembrane High Strength Waterproof Membrane for Dam and Canal Lining BOLIUS$ 0.15 - 0.20MOQ: 10 Square Meters
-
GeomembraneNegotiableMOQ: 2700 Rolls
-
Non-curable Rubber Paint Rubber Asphalt Waterproof Coating Made in ChinaUS$ 1.5 - 6MOQ: 500 Kilograms
-
Low Cost Waterproof Material ManufactureUS$ 1,000 - 50,000MOQ: 1 Set
-
PTFE Architectural Membrane MaterialNegotiableMOQ: 1
-
Special Compound BaseUS$ 0.12 - 0.25MOQ: 7000 Square Meters
-
PolyLock/HDPE Lock/ E Lock/ HDPE E Lock/Geomembrane Attaches HDPE GeomembranesUS$ 10 - 50MOQ: 1 Piece
-
Breathable House Wrap Membrane Roofing Waterproofing MembraneUS$ 0.42 - 0.42MOQ: 5000 Square Meters
-
<MIicroVENT> Waterproof Vent MembraneUS$ 0.1 - 3MOQ: 10000 Pieces
