100m/roll polythene and polypropylene polymer compound waterproof membrane

Specifications

1.Sepecificaton: 200g/m2-1200g/m2
2.Width: 1.2m, 1.5m
3.Length: 100m/roll, 50m/roll

 

Advantage:

1. It is of layer-construction, the surface layer is of strengthening protection, the second of ageing resistance, the third of waterproof and the beneath of strengthening adhesion. Every layer has special features which greatly improves the comprehensive function of the product.
2. Layer of ageing-resistance make it have long service life up to 50 years; Two layers of coarse non-woven cloth for strengthening protection and adhesion make it have big coefficient of friction and easy to bond firmly with various adhesives;
3. It is a kind of no poison, no pollution and environmental product.
4. High tensile strength, strong anti-permeability and good cold flexibility.
5. It can be applied only if there is no obvious water in the field.
6. It can be directly used in the cement construction and sandy soil, etc. And the surface of the membrane can be directly decorated by ceramics, etc.;

Specification:

No	ITEM		FS2
1	Tension N/cm	Normal temperature  ≥	60
		60°C              ≥	30
2	Pull lengthening,%	Normal temperature  ≥	400
		-20°C	100
3	Break tension,N		20
4	Water impermeability,30min,0.3Mpa		No leaking
5	Cold bending,°C                         ≤		-20
6	Heating elongation,mm	elongation        ≤	2
		shrinkage         ≤	4
7	Hot air ageing (80°C×168h)	holding of tension strength at break % ≥	80
		holding of pull lengthening at break % ≥	70
8	Alkali-proof[10%CaOH)2 normal temperature ×168h]	holding of tension strength at break % ≥	80
		holding of pull lengthening at break % ≥	80

 if you want to know more , please feel free to contact with Daisy at anytime.and welcome your visit!