HWL3 Face Discharge Diamond Tipped Drill Bit Soft To Hard Formations

The surface set diamond bit is produced from a single layer of natural diamond setting on the surface

of bit crown with hard matrix.
Surface set diamond bit is mainly recommended for drilling soft to hard formations. Generally speaking, surface set diamond bit can provide satisfying penetration rate.

In order to confirm the surface-set bit quality, we have to confirm the following information:

Diamond sizes (spc – stones per carat)

As a general rule; the softer formation, the larger the diamonds used i.e. 20 to 25 spc. In hard formation, smaller diamonds 30 to 50 spc are typical

Diamond quality

The standard range of natural diamonds for surface set bits is chosen in a special allround grade with special quality. The quality includes selected and processed diamonds with a highly polished surface. These stones have a high impact resistance and may be considered as an universal type. Recommended for soft to medium hard formations.

Size Available:

WL Series: AWL,BWL,NWL,HWL,PWL/AWLTK,BWLTK,BWL3,NWL2,NWL3,NWLTT,HWL3,HWLTT,PWL3,PWLTT
T2 Series: T2 46,T2 56,T2 66,T2 76,T2 86,T2 101
T6 Series: T6 76,T6 86,T6 101,T6 116,T6 131,T6 146, T6S 101
T Series:  T36,T46,T56,T66,T76,T86
Z Series:  Z46,Z56,Z66,Z76,Z86,Z101,Z116,Z131,Z146
B Series:  B36,B46,B56,B66,B76,B86,B101,B116,B131,B146
WF Series: HWF,PWF,SWF,UWF,ZWF
WT Series: RWT,EWT,AWT,BWT,NWT,HWT
WM Series: EWM,AWM,BWM,NWM
WG Series: EWG,AWG,BWG,NWG,HWG
Others:   NMLC,HMLC,LTK48,LTK60,BGM,NGM,ADBG,TBW,TNW,
ATW,BTW,NTW,NXD3,AX,NX,NXC,AXT,T6H,4 9/16,NWD4,412F,SK6L146,
TT46,TB56,TS116,CHD101