four side led underground light

Specifications

LED underground light
1.Input Voltage:12VAC/DC AC100-240V
2.Power :0.9W/1.6W/1.9W
3.CE and RoHS approval
4.IP67

Product name: four side led underground light

 

Name of led underground light

  

1*3W RGB Inground lights (Square flat cover, Round flat cover, Round big Convex cover, Round small Convex cover) 

3*3W RGB Inground lights (Round flat cover)
6*3W RGB Inground lights (Round flat cover)
9*3W RGB Inground lights (Round flat cover)

 

 

Part.Number of led underground light

  

IN2E11: 1x3W  Square flat cover             IN2C11:1x3WRound flat cove
IN2B11: Round big Convex cover             IN2D11:1x3W Round small Convex cover
IN2E13: 3x3W Round flat cover               IN2E16: 6x3W Round flat cover
IN2E19: 9x3W Round flat cover

 

Introduction of led underground light

 

Made up of RED, GREEN and BLUE high power LED, the inground lights can realize more than 16,770,000 kinds of color output, and with great effect and colorful features. It adopts wires with 4pin connectors, and work with 4-wire and 3-loop controller, which can achieve Gradual Change, jumping and many good light effect.

Application of led underground light

   

With IP67 rank and -20°C~45°C working temperature, the inground lights can adapt to a variety of indoor and outdoor temperature, humidity difference. They can be widely used in decoration of the buildings, stage, ancient buildings, shopping malls, hotel, cultural place and so on.

 

Technical parameters of led underground light

 

Part. No.	IN2E11/IN2C11/  IN2B11/IN2D11	IN2E13	IN2E16	IN2E19
Rated Voltage(V)	DC12	DC12V	DC24V	DC24V
Maximum power(W)	3.8	9	14.4	26.4
Maximum Current(mA)	320 mA	750MA	600	1100
Controlling system	4-wire and 3-loop controller, Simple DMX controller
Standard lens	25°/45°
Light source	RGB3in1   3W LED
White light flux(LM)	52	140	254	441
Standard length of  left wires	250mm
IP rank	IP67

 

Photoelectricity Parameters of led underground light

 

Products Type	LED color	Voltage (V)	Current (A)	Output Wattage (W)	PF	CCT (K)	Color rendering index	Luminous Flux(lm)	Lighting Effect (lm/w)
1*3W RGB 3in1 in-ground lights	Red	12	0.0966	1.159	1	1001	——	17.27	14.9
	Green	12	0.1179	1.414	1	8120	——	31.788	22.47
	Blue	12	0.1295	1.554	1	≥100000	——	6.8319	4.4
	White	12	0.3124	3.749	1	≥100000	——	52.308	13.95
3*3W RGB 3in1 in-ground lights	Red	12	0.1936	2.323	1	1001	——	51.119	22
	Green	12	0.2851	3.421	1	8253	——	88.468	25.86
	Blue	12	0.2896	3.475	1	≥100000	——	17.523	5.04
	White	12	0.7457	8.949	1	≥100000	——	137.7	15.39
6*3W RGB 3in1 in-ground lights	Red	24	0.153	3.672	1	1001	——	83.856	22.84
	Green	24	0.2152	5.164	1	8248	——	160.21	31.02
	Blue	24	0.2514	6.034	1	≥100000	——	31.769	5.27
	White	24	0.5937	14.24	1	≥100000	——	254.25	17.84
9*3W RGB 3in1 in-ground lights	Red	24	0.2674	6.417	1	1001	——	141.6	22.07
	Green	24	0.3924	9.417	1	8241	——	281.9	29.93
	Blue	24	0.4251	10.2	1	≥100000	——	55.677	5.46
	White	24	1.099	26.39	1	≥100000	——	441.72	16.73

 

Pictures of led underground light

 

 

Connection interface of led underground light

 

blackRubber wire with 4pins

 

Dimension of led underground light

1*3W RGB Inground lights with Square flat cover (IN2E11)

1*3W RGB Inground lights with Round flat cover (IN2C11)

1*3W RGB Inground lights with Round big Convex cover (IN2B11)

1*3W RGB Inground lights with Round small Convex cover

3*3W RGB Inground lights with Round flat cover (IN2E13)

6*3W RGB Inground lights with Round flat cover (IN2E16)

9x3W Inground lights with Round flat cover (IN2E19)

 

Illustration of the connection of led underground light

 

Method One: DMX controller as main controller(take 1*3W RGBinground light as example)

Method Two: Remote controlling(take 1*3W RGBinground light as example)

 

Controlling way of led underground light

 

The inground lights should be work with 4-wire and 3-loop controller, Simple DMX controller (Please refer to the instruction for operation) With a remote controller, 4-wire and 3-loop controller can be chose single mode optical efficiency, total 13 kinds, and also it can stteing the address of the controller to accept DMX signal and control the brightness. However, Controller drive capability is limited, eg. The max data if the 12V 10A remote RGB controller can drive is 120W(=12V*10A) inground lights, and take  3.8W(max power) 1*3W RGBinground light as another example, the controller just can drive 31pcs(120/3.8≈31). The maximum number of connections power of other inground lights calculated in this way.RGB amplifiers are needed when you want to connect more lights together.

 

Option of the power supply of led underground light

 

The total power of all the lights drived by RGB controller multiplied by 1.35, and the data you get is the power of the power supply needed.

 

Attention of led underground light

 

1. Please  follow the "use environment" requirements;
2. The inground lights work with 4-wire and 3-loop controller or Simple DMX controller, could not work without RGB controller;
3. Please choose the Adequate power supply according to the total power if the lights;
4. Three addresses for each RGB controller, the first simple DMX controller or 4-wire and 3-loop controller added by three is the address of next simple DMX controller or 4-wire and 3-loop controller;
5. The inground lights series connected with the same 4-wire and 3-loop controller or Simple DMX controller are with the same change effect;
6. The Maximum address of the 4-wire and 3-loop controller or Simple DMX controller is 510;
7. Please follow the illustration of conection when connect many lights;
8. To ensure the good control, please add amplifiers when the distance is more than 100meters.

 

Installation Guide of led underground light

 

1. Make sure the power supply of housing to connect ground;
2. The power and signal output wire of the last light in each loop connected waterproof cap;
3. Make sure the controller and power supply to work in ventilated, dry environment;
4. Please make sure no short-circuit before using, or the components may be burned.

Attention:
1. Power must be off before installing or removing;
2. Please replaced by new one when light body is damaged;

 

Common Faults and troubleshooting of led underground light

 

1. Please check if power supply is connected, or if the switch is in the connected position when the light is not lit.
2. Please check the power connection when the lights do not work well;

Attention: If the lights still can not work well after trying the methods above, pls contact with  professional maintenance staff to repair, and do not dismantle yourself.

  

Packaging, delivery and storage of led underground light

 

white box or pack it according to your request

 

 

 

Certification of led underground light

 

 

Our factory of led underground light

 

Company name	Illusion LED
Year Established	2007
Sale man and workers	100+400 people
Mian Market	Western European, North America, Asia

 

 

1.your inquiries will be dealed with within 24 hours

2.widely sales network and excellent salesman team for your service

3.monthly capacity of 100,000units ,so,do not worry about the suplyablity.

4.spare for each order

5.OEM&ODM, any your customized lightings we can help you to design and put out into product.
6.Protection of your sales area, ideas of design and all your private information.