Whosale Price HID H4 Xenon Kit 35w 55w Hi/Lo Beam 12v 24v Canbus 6000K HID

one set HID with one box

Specifications

1.HID H4
2.Low power consumption
3.Durable and Waterproof
4.Universal connectors
5.Anti-electromagnetism disturb

Whosale Price HID H4 Xenon Kit 35w 55w Hi/Lo Beam 12v 24v Canbus 6000K HID

 

 

Input voltage range:	AC 9v-16v
Output power in stable state:	35w
Operating input current:	3.2A
Maximum input current:	10A
Instant ignition voltage:	23000v (23KV)
Output power:	reach 80% in cold starting in 3s,reach rating output power in 8s
Ballast life-span:	≥3500hours
Operating temperature:	-40°C -- + 105°C
Other features:	waterproof, shockproof

Note:H1 H3 H4 H7 H11 9005 9006 available

 

 

1-Greater Visibility - 3 times brighter more consistent illumination of the road than factory halogen bulbs, increases comfort & reduces fatigue when driving at night.

2-Longer Life - Designed to last for 50000 hours.

3-Easy installation - Just plug and play, NO modification is required.

4-Durable and 100% Waterproof - Build to work in all season

5-Low power consumption - only consume 35W of electricity, 3 times more efficient than traditional halogen bulbs, 35% less power consumption, thus generate much less heat during operation.

6- Suitable for all aftermarket HID Bulbs

Note:Available Color Temperature:    

3000K -Yellow(Golden)

4300K -Amber(OEM White)

5000K -Amber White(Closest to OEM/Between 4300K and 6000K)

6000K -White(Pure White, diamond white)

8000K -White Blue, Iceberg blue

10000K -Blue White (Brilliant Blue, Iceberg More/Close to 8000K)

12000K -Blue White(Brightest & Close to 8000K, Exotic Violet)

15000K -Deep Blue

30000K(HP) - Violet(Purple), Pink Violet

Pink(HR) - Pink

Green(HJ) – Green

 

 

 

 

Application:

Universal For all cars

Install:

A.HID kit installations start with preparation. You have to make sure the vehicle is off the battery is disconnected, and the engine is cooled down. This is will ensure your safety. Now we can move to the actual installation. If you have a single low beam kit, locate your low beam dust cover on the back of your headlight assembly. Remove the cover by twisting it counter clock wise. This should unscrew the dust cover giving you access to the bulb. Make sure you unplug the bulb from the wiring harness before you attempt to remove it. Now you can continue to place the xenon bulb in place of the halogen bulb you just removed, just make sure you don’t touch the glass part of the bulb.

B.: Installing the ballast. First thing is to find a good location to place the ballast, somewhere close enough to able to reach the bulb with the wiring plugs. Once you have the ballast secured then you can proceed to plug the wiring to the bulb, and plug the old harness to the ballast.

C.: In HID kit installation is to double check all the wiring plugs to make sure everything snapped into place correctly. Also double check to make sure that the ballast is securely attached to the vehicle. Now you can reconnect your battery and test out your new HID upgrade.