Aluminum Rolling oil and waste oil recycling machine

Specifications

1.Advanced technology
2.Turnkey project
3.High production efficiency
4.Energy conservation
5.No discharge for three wastes

Aluminum Rolling Oil and waste oil recycling machine (Turnkey Plant)

 

The indicators about before and after regeneration

 

Physico-chemical item	Pre-regeneration	Post-regeneration
Dynamic Viscosity	2.3mm2/s	1.92mm2/s
Flash point	88	90
Acid number	0.24	0.03
Moisture&mechanical impurities	0.50%	None
Heavy components	5.53%	1.10
Distillation	216~270°C	218~250°C
Dry point	282	265
Color degree	5	0

 

  

We are choice to use the worst –quality waste aluminum rolling oil (collected from trench under rolling mill) to process. Through the inspection process, the rolling lubricating oil regenerated was fully satisfied to the requirements of cooling oil.

 

The following picture shows the comparison result before and after regeneration.

 

 

Complete plant contains:

 

1. Vacuum  system

2. Thermal  oil  heating  system

3. Electric control  cabinet

4. Technical  personnel  training

5. Technical  training  and  so  on.

 

System Working Station:

 

Electronic Control Device: