preformed conductor ADSS cable tension set

Specifications

1,easy installation
2.good meterial and low price
3,well corrosion resistant
4.special design and least wear

Product Characteristic:

         OPTACE ADSS Cable Tension set is always used for the link of turning, splicing,and termination. Sprial aluminum-clad steel/galvanized clamp have the capitally tensile strength. So as to protect cable and minimize vibration. A full set of the tension set include deadpend component, structural reinforcing rods and the matched fittngs. The grip strength of this clamp is bigger than 95% of the rated tensile strength. This kind of clamp bears the excellence of simple structure, easy to installation and also enables to reduce the cost. It is suitable for the ADSS cable with the span less than 100m, or the turning angle less than 25 degree .

Application

Tension set for ADSS cable is used to connect cable and pole or tower for ADSS cable line, and clamp can protect cable and help cable to reduce vibration.With preformed rods' special design,it can keep tension clamp not produce the  stress concentration which damage ADSS cable and keep cable normal use.

Components and Material:

 Anchor Shackle--Hot dip galvanized steel. Anchor Shackle is connected with Reinforcing Pole units.

 

 Eye Chain Link--Hot dip galvanized steel. Eye Chain Link is intended for connecting Anchor Shackle and Clevis Thimble.

 Clevis Thimble---Hot dip galvanized cast steel. Clevis Thimble is plugged in shackle of Strain Clamp for protection and connection.

 

Inner Protection Rods----- Inner Protection Rods are made of aluminum clad steel wire. Inner Protection Rods increase friction with a layer of particle emery inside and decrease side pressure to cables. Rods are assembled into four subsets in workshop which reduce misalignment errors and speeds installation. The ends are bent outward to provide stress relief at the critical cable departure areas.

 

Outer Reinforcing Rods--Rods are assembled into one subset with a layer of firm emery inside in workshop, in order to increase gripping strength of Tension Sets while decreasing side pressure. Sets are color marked to reduce misalignment errors and to install quickly.

note:

      We have various kinds of power fittings, such as linking fitting, protective fitting, splicing fitting, clamps, connectors etc. Our most distinguished advantage is we can design or organized the complete suspension or tension insulator string according to your need. Please contact us for more information.