Contact Platform Support
Help CenterFull Tension Preformed Conductor Splice
Related Products
-
Welding Ground WireNegotiableMOQ: 100 Sets -
Preformed Ground Wire Dead-end ClampNegotiableMOQ: 100 Sets
-
Suspension Clamp for Power FittingsNegotiableMOQ: 100 Sets
-
Preformed Guy Grip Strain Clamp for ADSS OPGWNegotiableMOQ: 100 Sets
-
Galvanized Steel Dead-end Double Wrap Grip for Steel Cable or Strand on PoleNegotiableMOQ: 100 Sets
Specifications
Armour clamp1.Least loss;
2.Anti-loosening;
3.Well corrosion resistance;
4.Easy installation;
Armour clamp
Application&Structure
Full tension preformed conductor splice follow the break connection, damage repair and so on, can replace the widely used hydraulic connecting pipes, burst pressure connecting tubes connecting methods.
Full tension preformed conductor splice is made from the inner section of tension continue, filling section, the outer section of three parts.
1)The inner rods Shall be used to follow steel core;
2)Filling rods shall be installed in the inner layer, guaranteeing installation of the same diameter and the diameter ACSR.
3)The outer line splicing is designed to follow basic agreement Traverse only slightly increased to compensate for the length of stripped of the aluminum wire.
Characteristics
1.The grip strength of full tension preformed conductor splice forces up to the rated breaking strength of strands, such as electrical conductivity than ACSR long.
2.Full tension preformed conductor splice can be restored ACSR Tension follow the breaking strength of 100% and 100% of the wire resistance.
Consideration
1.Whether or not the new and old wire, steel core and aluminum wire must be installed within the length of the article follow the surface thoroughly polished, bright and clean the surface after the coated surface quality immediately, and the conductive grease wire match, and then Start the installation.
2.When connecting the wire section of the mid-point and point alignment damaged during installation, the end lengh of full tension preformed conductor splice has been installed from end of the preformed armour rods or short preformed armour rods is not less than 150mm, only wire damage on the last point in the support points or damage point, we can continue with this article, and play follow the maintenance performance of the above article.
3.Full tension preformed conductor splice can only be used once.
Send Inquiry to This Supplier
You May Also Like
-
AVENTCIS Original Authentic Anvochi Cylinder Seal Repair Kit 1827009907NegotiableMOQ: 1 Piece
-
Best Price Cnc System Unit Screen Display A02B-0309-B502 oi mf Fanuc ControlNegotiableMOQ: 1
-
12PC High Carbon Steel Metal Blade Offset Thickness Gauge ToolUS$ 1 - 30MOQ: 600 Pieces
-
Tungsten Carbide Insert for CNC MachineUS$ 1 - 1.5MOQ: 1 Kilogram
-
Ice Storing BoxNegotiableMOQ: 1
-
Bag Closing Machine Spare PartsNegotiableMOQ: 1
-
Magnetic Static Clip(made of Copper,direct Suck),handware Tools,ISO9001,UKASUS$ 3.6 - 54.7MOQ: 10 Pieces
-
21Spindles/11Spindles Drilling Head Noise Aborsbing BoardNegotiableMOQ: 3 Pieces
-
Mini Electric Hand Drill Holder Suitable For Electric Drill Factory Direct Sale Good Price In StockUS$ 1 - 5MOQ: 10 Pieces
-
Handwheel for Electronic Cover With Shot Blasting and Anodize Custom MadeUS$ 2 - 2.5MOQ: 100 Pieces
