Tension set for ADSS cable

Specifications

Tension set for ADSS cable
1.Least wear;
2.Easy installation;
3.Special design;
4.Reduce vibration.

Tension set for ADSS cable

 

 

Application

Tension set for ADSS cable is used to connect cable and pole or tower for ADSS cable line, and clamp can protect cable and help cable to reduce vibration.With preformed rods' special design,it can keep tension clamp not produce the  stress concentration which damage ADSS cable and keep cable normal use.

 

 

Structure&Materials

 

Shackle:

Hot galvanized steel shackles play a role in connection with the tower fasteners. Failure load: U-7 to 70kN, U-10 to 100kN, U-12 to 120kN.

 

Preformed tension rods:

Be made of galvanized steel wire or aluminum clad steel and preformed into the process when prefabricated beam, inner wall layer of emery stick, and enhance the friction between clamp and cable.

 

Tension rods:

Galvanized steel precision, the heart-shaped tension ring and shackle connected to avoid strain clamp too close to the exit of cable from the pole, keep the cable bend radius large enough.

 

Heart-shaped tension ring:

Galvanized steel precision, clip embedded in the U-bend Clamp head, the protection Clamp connection with the extension rod. Failure load is 40kN, 70kN, 100kN and 120kN, etc..

 

Preformed armour rods:

Galvanized steel or aluminum clad steel wire, preformed armour rods wall sticky particulate silicon carbide to increase friction and reduce the pressure on the cable side. preformed rods  when the pre-processing into several sub-beams, to avoid installation errors and to facilitate rapid installation. Preformed wire toward the end of different specifications according to the radial lateral bending, to avoid vibration in the breeze under the cable clamp at the end of the friction and prevent damage to cable extrusion.

 

1. Dead-end Set for short Span ADSS

1.1 Description 

Span length less than: 250m

Breaking  strength: 20kN

 

 

1.2 Component

IT	Description	Art.no	Material	Quantity	Weight(kg)
1	Shackle	U-5	Galvanized steel	1	0.4
2	Thimble	TC-04	Galvanized steel	1	0.45
3	Dead-end Grip Rods		Aluminum Clad steel	1

 

1.3 Specification

 

Span length less than 150m

Art.No	Dia,of ADSS(mm)	Length of  dead-end grip rods(mm)
ANLAW 1000 010	9.0-10.0	822
ANLAW 1110 010	10.1-11.1	872
ANLAW 1220 010	11.2-12.2	915
ANLAW 1330 010	12.3-13.3	915
ANLAW 1440 010	13.3-14.4	915
ANLAW 1550 010	14.5-15.5	915

  Span length less than 250m

Art.No	Dia,of ADSS(mm)	Length of  dead-end grip rods(mm)
ANLAW 1000 020	9.0-10.0	915
ANLAW 1110 020	10.1-11.1	915
ANLAW 1220 020	11.2-12.2	932
ANLAW 1330 020	12.3-13.3	1042
ANLAW 1440 020	13.3-14.4	1160
ANLAW 1550 020	14.5-15.5	1160

 

2. Dead-end Set for middle Span ADSS

2.1 Description 

Span length less than: 500m

Breaking  strength: 50kN

 

 

 

 

3. Dead-end Set for large Span ADSS

3.1 Description 

Span length less than: 1000m

Breaking  strength: 80kN