Contact Platform Support
Help CenterFA43 - ZERIO PLUS EDA-A2102 WIRELESS RADIO BOOSTER UNIT / SOUNDER WITH ANTENNA
Related Products
-
FA37 - WIRELESS ZERIO EDA-C5000 RADIO CALL POINT BREAK GLASS UNIT FIRE SAFETYUS$ 119 - 150MOQ: 10 Units -
FA51 - ZERIO PLUS EDA-A6000 WIRELESS ADDRESSABLE RADIO ELECTRONIC SOUNDER 105dBUS$ 175 - 218MOQ: 10 Units
-
FA50 - ZERIO EDA-Z1000 WIRELESS 8 ZONE RADIO FIRE ALARM CONTROL PANEL SYSTEMUS$ 496 - 620MOQ: 10 Units
-
FA40 - WIRELESS ZERIO PLUS EDA-A2000 RADIO SOUNDER 14 TONES CONTROL PANELUS$ 151 - 188MOQ: 10 Units
-
FA35 - WIRELESS ZERIO EDA-R5000 RADIO OPTICAL SMOKE DETECTOR SELECT SENSITIVITYUS$ 132 - 165MOQ: 10 Units
Specifications
ZERIO PLUS EDA-A2102 WIRELESS RADIO BOOSTER UNIT / SOUNDER WITH ANTENNA
• Mains powered.
• Self learning device verifiable from panel.
• Up to 4 boosters per panel.
• Adjustable sound level up to 105dB.
• Supplied with stub antenna.
• EDA-A2102 booster is capable of bi-directional message transmissions between compatible Zerio devices and a control panel thus substantially increasing the system range. Up to four repeaters can be used and each repeater must be in range of the main control panel as boosters cannot communicate with each other.
• It is mounted in a double gang surface mounted box with a Fused Connection Unit (FCU) front plate.
• Airwaves are continuously monitored by the repeater for any instructions from the main control panel or devices so that all valid messages are transmitted on.
• Communication link integrity is constantly checked with frequent transmissions between the repeater and the main control panel on which any errors are immediately displayed.
• Any internal faults such as unit removal, battery low, receiver failure or mains failure are relayed back to the main control panel.
• The control panel controls the units verifiably, continually adding and removing devices that are either in or out of range of the main control panel. No set up is required by the engineer.
• The unit has the same functionality as a standard sounder with the additional features of repeating messages from devices in radio range of the unit.
• Power source: 3.7V derived from 230V AC mains power supply
• Stand-by Battery: D Lithium cell. (EDA-Q620) (60 day standby)
• White ABS Plastic
• Single SMT Circuit Board
• Options: External / Remote Antenna
• Conforms to relevant parts of EN54 and BS5839
• CE Approved
We offer bulk discounts so give us a call to discuss your requirements.
Contact: sales(at) or 0116 2761162
Send Inquiry to This Supplier
You May Also Like
-
Fire Smoke SensorNegotiableMOQ: 2400 Pieces
-
CO DetectorNegotiableMOQ: 1 Piece
-
2015 High Quality Cheap Electronics Fire Alarm SirenUS$ 0.1 - 10MOQ: 5000 Pieces
-
2012 Newest Smoke Alarm/Detector/SensorUS$ 0.1 - 0.2MOQ: 200 Pieces
-
Fire Detection & SuppressionNegotiableMOQ: 1
-
Flame DetectorUS$ 1 - 100MOQ: 3 Pieces
-
LPCB CE Approved Infrared Detector Tx7130 Beam Detector Conventional Reflective Beam Smoke Detector for Fire Alarm SystemUS$ 95 - 105MOQ: 1 Piece
-
2025 China DC 48V Wired Smoke Detector With Relay Output For Electronics Panel SecurityNegotiableMOQ: 1080 Pieces
-
Wholers Sell KF94/N95/KN95/surgical Mask/KIDS Face Masks/adult Face Masks/kids Face Masks（SKYPE:lifuli123）US$ 0.5 - 1MOQ: 1 Piece
-
Wireless Sounder Strobe Wireless Fire Alarm Sound Flashing Lighting AlarmNegotiableMOQ: 1 Piece
