Multi coins selector / jm-926 / pulse interface /game machine coin acceptor

jm-926 CPU Multi Coins Selector coin Acceptor for Vending Arcade machine That accept 6 type coins at the same time

Model number : jm-926 (Also Called jm-926)

jm-926  is a multi coin selector , can accept up to6 kinds of different coins at the same time. This type of coin selector is widely used in Vending machines, Arcade Games, Message chairs, and other self–management systems. JY-923 is mainly based on material, weight and size to identify coins. We use the most up to date algorithm to design software, therefore jm-926 is very stable and accurate even when environment changes, such as temperature, humidity etc… In order to increase the accuracy, we suggest different version of coins use different channel to set up. .


Product features:

(1)Capable of accepting all worldwide Coins and Tokens.

(2)Intelligent CPU software control, and high accuracy.

(3)Self-programming without PC.

(4)Accept 1~6 different kinds of coins at the same time.

(5)Free to set up pulses' output.

(6)Prevent not only electric shock but also electromagnetic interference.

(7)Automatic self-test for problems.

1.LED light-The light of indicidation.
2.4pin Socket
3.Two way switch-signal output NO. or NC.
4.Three way switch-Output signal-fast: 20ms , medium: 50ms , slow: 100ms
5.2pin Socket-Electromagnetic valve DC 12V
6.“Setup” button
7.LED display
8.“Add” button-Plus "+" value
9.“Minus “button-Minus “-” value
10.Coin slot
11.Press-button for removal of blocked coin
12.Return slot of Coin
13.Position of electromagnetic strobe

F&Q

Coins can't pass through

(1)Check if the connection is correct or poor connection.

(2)Check if sampling is appropriate.

(3)Check if there is something stuck inside.

Can't identify outputs

(1)Check if 2 way switches -NO. NC.- are correct.

(2)Check if Singal wire is connected correctly .

(3)Check if there is pull-up resistor with signal wire(not allowed).

(4)Check if there is something stuck on the channel where the coins pass out.

Coins can not pass smoothly

(1)Check if the parameter is set up appropriately.

(2)Check the accuracy switch.

(3)Check if there is something stuck on the channel where the coins pass out.