Contact Platform Support
Help CenterSupport Rollers Used in Rotary Kiln
Related Products
-
Support Rollers Basic Components of a Rotary KilnUS$ 1,500 - 6,000MOQ: 1 Metric Ton -
Support Roller for Cement Lines Rotary KilnUS$ 1,500 - 6,000MOQ: 1 Metric Ton
-
Thrust Roller/Support Roller for Rotary KilnUS$ 1,500 - 6,000MOQ: 1 Metric Ton
-
Rotary Supporting Roller for Botary KilnUS$ 1,500 - 6,000MOQ: 1 Metric Ton
-
Support Roller and Shaft for Rotary KilnUS$ 1,500 - 6,000MOQ: 1 Metric Ton
Support rollers used in Rotary Kiln
cylindrical roller bearing
We are the professional industrial equipment parts supplier, our factory has engaged in domestic trade over 25years. And also welcome to vist us.
we manufacture all kinds of parts such as large gear,small gear,Riding rings(split ring/segment ring ),support roller,shaft,hollow shaft,sphercial bush,impeller for power plant,couple bearing,roller mill,grinding tools,crusher,reducer,belt conveyer ,steel ball etc.
OEM and customzied is also accepted.Our product is widely sold in the word.Welcome to contact with us .
Hope we would build a good and long business cooperation relationship with each other.
Specification:
1.Material:Carbon steel or Alloy steel
2.OEM is accepted and Comprehensive after-sale servic
3.Competitive price and good quality
3.Package:According to customer's requirement
Introduction:
The basic components of a rotary kiln are the shell, the refractory lining, support tyres and rollers, drive gear and internal heat exchangers.
The rollers must support the kiln, and allow rotation that is as nearly frictionless as possible. A well-engineered kiln, when the power is cut off, will swing pendulum-like many times before coming to rest. The mass of a typical 6 x 60 m kiln, including refractories and feed, is around 1100 tonnes, and would be carried on three tyres and sets of rollers, spaced along the length of the kiln. The longest kilns may have 8 sets of rollers, while very short kilns may have only two. Kilns usually rotate at 0.5 to 2 rpm, but sometimes as fast as 5 rpm. The Kilns of most modern cement plants are running at 4 to 5 rpm. The bearings of the rollers must be capable of withstanding the large static and live loads involved, and must be carefully protected from the heat of the kiln and the ingress of dust. In addition to support rollers, there are usually upper and lower "retaining (or thrust) rollers" bearing against the side of tyres, that prevent the kiln from slipping off the support rollers.
Name: Ms.Crystal Chen
Tel/WhatsApp: 0086-15268181579
Skype: crystal00361
Wechat: ctt9036
Send Inquiry to This Supplier
You May Also Like
-
DIN PN10/16 Ansi B16.5 Wn Flanges Carbon Steel SS304 Slip on Flange Plate Blind Flange for Industrial PipesUS$ 16.00 - 30.00MOQ: 20 Pieces
-
Custom Hot Forging Parts Carbon Steel & Alloy Steel Forging Service for MachineryNegotiableMOQ: 1 Ton
-
Large Diameter Swing Bearing Gear With Custom Tooth Profile & Hardness HRC 58-62NegotiableMOQ: 1 Piece
-
Pipe FlangeNegotiableMOQ: 2700 Pieces
-
Electrical Pure Iron Forging for Motor Cores With High Magnetic Permeability and Low Iron LossNegotiableMOQ: 1 Ton
-
Bolt Hole Plastic Valve and Flange Edge ProtectorNegotiableMOQ: 100 Pieces
-
For Electric Power Fitting Reusable Casting Parts With Machining SurfaceNegotiableMOQ: 100 Pieces
-
High-precision Carbon Steel Flange Customization Large Diameter Stainless Steel Flanging Butt Welding Flange Carbon Steel Flat Welding FlangeUS$ 1.5 - 100MOQ: 1 Piece
-
CNC Machining Parts Ductile Iron Material of Construction Engineering Fittings Parts FastenerUS$ 1 - 2MOQ: 1000 Kilograms
-
Forged Aluminum JointsUS$ 0.1 - 0.1MOQ: 100 Pieces
