End hooked stainless steel fiber for concrete

Cold drawn wire Stainless Hooked End Steel Fibre for Refractories Materials

Harvest’s hooked end fibres are cold drawn wire fibres for refractories materials for the high temperature processing industries (Metallurgy, petrochemical, cement, glass, power station and other furnaces).

Chemical Analysis (%):

*Other materials :430/304/330/316…& low carbon steel can be manufactured specifically to suit customer’s requirements.

Service Temperature:

Dimensions:

• Lengths are 15/20/30mm. Other lengths can be manufactured specifically to suit customer’s requirements.

• Equivalent diameter 0.2/0.4/0.5/0.6/0.75/1.0mm. Other diameters can be manufactured specifically to suit customer’s requirements.

Packing:

• Fibres are packed in 1/5/10/20kg cartons then put on pallets. Other packaging can be supplied if requested.

Using method and using quantity:

• Usually use 1-5% ( volume ) of steel fiber in refractories or concrete materials, mixed evenly to maximize the use effect of steel fiber into full play. Mix method :1. Wet mix; 2. Dry mix.
• In order to prevent explosions & radiation for concrete buildings , it is recommended to use steel fibres number 40-60% (volume).

Health & Safety:

• USING STEEL FIBRES UNDER NORMAL CONDITIONS DOES NOT PRESENT AN INHALATION, INGESTION OR CONTACT HEALTH HAZARD.
  
  

• BECAUSE OF THEIR PHYSICAL NATURE, WE RECOMMEND THAT OPERATIVES HANDLING THE FIBRES SHOULD ALWAYS WEAR GLOVES.
  
  

• TO AVOID DETERIORATION OF PACKING, THE FIBRES SHOULD BE STORED IN A DRY ENVIRONMENT.