Contact Platform Support
Help CenterCold Drawn Stainless Steel Wire Fibre for Refractories Materials W-310/25/.40HE
Related Products
-
Steel Fiber W-LCS/30/.50HE for Reinforcement Concrete of Tunnel, Bridge, Factory Floor,...US$ 650 - 1,200MOQ: 20 Metric Tons -
Steel Fiber for Refractory Material for Power StationUS$ 1.8 - 2MOQ: 1000 Kilograms
-
Concrete Reinforcement Hooked End Steel FiberUS$ 4,250 - 4,550MOQ: 1 Metric Ton
-
Cold Drawn Wire Stainless Hooked End Steel Fibre for Refractories MaterialsUS$ 4,250 - 4,550MOQ: 1 Metric Ton
-
2015 High Quality Steel Fiber for Concrete ReinforcementUS$ 1,625 - 1,780MOQ: 1000 Kilograms
Harvest’s “W-series” Steel Fibre Product Data Sheet
W-310/25/.40HE
Harvest’s “W-series” fibres are cold drawn wire fibres for refractories materials for the high temperature processing industries (Metallurgy, petrochemical, cement, glass, power station and other furnaces).
Chemical Analysis (%):
Alloy No. |
Cr |
Ni |
C≤ |
Si≤ |
Mn≤ |
P≤ |
S≤ |
310 |
24-26.00 |
19-22.00 |
0.08 |
1.5 |
2.0 |
0.045 |
0.030 |
*Other materials :430/304/330/316…& low carbon steel can be manufactured specifically to suit customer’s requirements.
Service Temperature:
Melting Point |
Recommended Maximum Service Temperature |
||||
310 |
1380-1455℃ |
Cyclic Heating |
1000℃ |
Continuous Service |
850℃ |
Dimensions:
Lengths are 6/10/15/25/30/50/60mm. Other lengths can be manufactured specifically to suit customer’s requirements.
Equivalent diameter 0.2/0.4/0.5/0.6/0.75/1.0mm. Other diameters can be manufactured specifically to suit customer’s requirements.
Packing:
- Fibres are packed in 1/5/10/20kg cartons then put on pallets. Other packaging can be supplied if requested.
Using method and using quantity:
- Usually use 0.2-2% ( volume ) of steel fiber in refractories or concrete materials, mixed evenly to maximize the use effect of steel fiber into full play. Mix method :1. Wet mix; 2. Dry mix.
- In order to prevent explosions & radiation for concrete buildings , it is recommended to use steel fibres number 40-60% (volume).
Health & Safety:
USING STEEL FIBRES UNDER NORMAL CONDITIONS DOES NOT PRESENT AN INHALATION, INGESTION OR CONTACT HEALTH HAZARD.
BECAUSE OF THEIR PHYSICAL NATURE, WE RECOMMEND THAT OPERATIVES HANDLING THE FIBRES SHOULD ALWAYS WEAR GLOVES.
TO AVOID DETERIORATION OF PACKING, THE FIBRES SHOULD BE STORED IN A DRY ENVIRONMENT.
.
Send Inquiry to This Supplier
You May Also Like
-
HPL Panel (clean Room)NegotiableMOQ: 100 Square Meters
-
Fiberglass Insulation Roll Width 1.2m, Density 12kg/m3 With or Without Paper/aluminum FoilNegotiableMOQ: 100 Rolls
-
304 Stainless Steel Rib Lath Price Colombia V-Ribbed Lath Expanded Mesh for Structural Reinforcement in High-Corrosion AreasUS$ 1.7 - 3.2MOQ: 1 Piece
-
Gypsum Ceiling Metal Frame, Compatible With Armstrong Ceiling Grid ComponentsNegotiableMOQ: 1000 Pieces
-
pu Wall Sandwich Panel Rigid Insulation Polyurethane Foam BoardNegotiableMOQ: 1
-
Unitized Frameless Glass Curtain WallUS$ 1 - 260MOQ: 200 Square Meters
-
Stainless Steel Stain Chrome Finished 36 Sheet Metal GaugeUS$ 1 - 30MOQ: 600 Pieces
-
Factory Direct Sale Steel Stand Coupler Scaffolding in Large StockUS$ 4 - 6MOQ: 5000 Pieces
-
ISO Access Cover Supplier Custom Made in Zhejiang China With 30 Years ExperienceUS$ 0.5 - 19.9MOQ: 500 Pieces
-
Antibacterial EPS Sandwich Panel for Prefab HouseNegotiableMOQ: 300 Square Meters
